Search results

i have been trying to sort this out for over a week , just about run out of ideas .....Help its a 2001 150k miles,1 dont have any codes as reader wont work on this year it always starts and idles fine, if i drive slowly and dont accelerate to fast i can get to about 40 mph , but if i...

injector removal which method worked for you ? i have been here before i have removed a set of injectors on my old engine but this engine which replaced the one with the broken crank now requires the injectors taking out and replacing, (they are tight) i have tried pulling them out with a...

this is how i tested my injectors, you also need to set up the cam sensor

2001 td4, with synergy 1, struggling to get over 70mph the other day weather had been a torrential rain storm,:( engine running well but did not want to go above 70, i have removed the turbo solenoid and pulled it apart, all seemed ok, and now refitted it , going for a test run soon, will...

i have had the cracked chassis noise for a few months and as the noise was getting worse i thought it was about time i tackled the issue, its a very common problem on the freelander, usually on the off side, its where the rear subframe - front bolt is attached to the chassis, what happens...

last weekend i had a birthday treat , i went to the landrover experiance centre located at gaydon,its next to the motor heritage museum, i had the 1 hour taster session in the all new Rangerover sport, if you ever get the chance its well worth it, the course is quite challenging and the...

last year i had an issue with the td4 engine non starting, its a long story if you search for my thread, it turned out to be a snapped crankshaft to determine if the injectors were working ,i removed the injectors and arranged them as shown in the photos, i also set up the cam position...

just though i would evaluate my 8 years of owning a 2001 td4 freelander, 120k ,( replacement engine fitted this year) on the whole it has been a very reliable car, although i would never recommend owning one unless you have the skills or deep pockets to keep it maintained , otherwise it...

a few months ago the crankshaft snapped on my freelander , here are a few pics the engine a td4, m47, 2001, 110,000 miles , had been running without any problems , serviced and oil changed at the recommended intervals, using fully synthetic oil,i have owned the car from 32k miles , engine...

ok guys , here is a bit of a story and it has taken me the best part of two weeks to get the engine running, lots of head scratching , your input would be much appreciated. i was on a two hour drive, everything running great, doing about 40 mph country lanes, then the engine starts making a...

seasons greatings boys and girls, here is neat trick im sure you will enjoy,:) how dose she do that ? http://www.crainium.net/jdjArchives/2006/08/hanky_panky.html

i have been looking into transmission drive faults in the last few weeks just for curiosity, and was wondering, 1, how do they carry out the brake efficiency test on a permanent 4 wheel drive vehicle,,,, the testing centre i use only have a single axel tester, and i never see them road test...

here is some info i came across, could be usefull for anyone worried about drivetrain issues , The Freelander has 3 main drivetrain problems areas, the Intermediate Reduction Drive (IRD), Viscous Coupling (VC) and the rear differential. The reason for this is the front wheels on the Freelander...

here is something to be aware of ,, dont get caught out ,, the other night , while driving in the new forest i picked up somthing in my rear tyre, tore a hole in the rubber,,i pulled over luckly into a layby, it was pitch black, and i didnt have a torch, problem number 1 i used my phone...

hi everyone , i was wondering if anyone uses a diesel fuel additive to help keep the injectors clean ? recently, i posted a problem with my 2001 td4 ( 70k miles ) having really wobbly tickover problems,,,,, anyways after checking everything i possibly could and with the help from others on...

i was just wondreing has anybody tried decatting their td4,or any other deisil for that matter , either knocking the origanal out or an aftermarket insert ? and what effect did it have is it worth doing ? john t

hi guys, im fairly new to the site and have read through a lot of the posts in an effort to see if anyone has a similar problem to myself, but i havent found one yet , so hear goes, my Td4 has developed a rather severe wobble on tickover and it also seems to lack power,especially when pulling...