Search results

Hi all, just a quickie - I have four new boxed seat belts as pictured. I went to fit them in my one-ten but discovered there's a Mount missing. Where the tape measure is, on my old belts is a triangle bracket the belt moves through, which bolts up and behind the shoulder, but new belts don't...

These: Has anybody used one? I've got it all figured out, wiring is in place, I've written a list of every module and terminal and it's coming in at around £70 but before I take the plunge has anybody got experience with these units? I don't doubt the quality but my only real concern is that...

Hi all, I've been looking for a few of these lamp holders. All searches lead to rtc3878 but that is the type that connects to the pcb for its input. There are 5 that don't (24v, hrw, seat belt and two others) and instead have male blades on for connecting individual cables, like this: I'd like...

Hello, as some of you may know, I'm in the process of building a custom wiring harness from scratch for my 1984 110 with 200di. It's almost complete but I've now got to the point where I've got some additional relays that need powering. Load and supply for the circuits relevant is all taken care...

As per title, I'm embarking on making myself a new wiring harness but don't wish to chop up my old one at the moment. In the case of a lot of the old rubber bullet block style connectors I will use more modern blocks, as I've not in two years found anywhere that supplies the bits for me to...

Hi everyone, can anyobe pount me in the direction of a how-to or offer any advice regarding the rear glass in a second row door? I'm really struggling to re-assemble one of my doors with new glass and runners etc, despite already doing one but can't remember how. Thanks

I have here four standard 16" landrover riveted type steel wheels with tyres free to collect. Two tyres are Olympic steeltrek 7.50 16 and are perished but min 6mm tread, one is a Goodyear wrangler 7.50 16 not quite as perished and 6mm min tread, one is runway enduro 235 85 16 and has very little...

I have in the garage a 25 litre drum of red diesel removed from my 110 3 years ago and a 25 litre drum of Used mixed oils. Need gone asap. Collection from Ilkeston, Kimberley or Eastwood

Stolen from my rebuild thread for a bit more exposure. Anybody able to help on a mechanical issue? I've not done anything to the 110 for about three months now, every job seemed to hit a dead end, work has been hectic, kids, life etc etc... Last time I ran the engine it decided to leak oil...

Good evening everyone, I'm having a spot of bother with my 110 drop arm. It's on the shaft of the box and seems a good fit, however, there's still a gap above it of around 3mm and the seal there is just free to move about. This can't be right can it? I've got about 3 threads sticking out of the...

Disco 300tdi 180k p reg Spares; rear prop £10 trailing arms £10, radius arms £10, 3x cyclone alloys £10, 24 spline diff £10, almost complete dash inc cup holder, clocks vents £25, engine + gearbox (needs new plate in gear selector) inc rad, oil cooler, alt, starter, turbo and down pipe £350...

All doors from a discovery 300tdi 'XS' model, complete with outer plastic trim and lower decals, fronts include electric mirrors and window mechanisms. Rears include windows but no regulators. No door cards included. Fronts £30 each rears £25 each. Also have bonnet, wings and rear door. Collect...

Here I have a dog guard (needs a lick of paint) and a snorkel complete with an already suitably bodged air box bottom to save cutting up your own. Guard £5. Snorkel £45. Will consider swapping for more crap, tools, steel etc. but money seems easiest. Located in ilkeston, Derbyshire.

Hello, just wondering if anybody can please tell me what size circlip the steering box takes where the main lower seals fit. I bought a seal kit and it didn't have one included. I went back to the supplier who said none of the kits they had in stock included one and they couldn't get one (and...

Hi all, I've got a disco 200tdi chassis and log book, bought for a project that's now been abandoned. Only welding needed is around one rear bump stop mount. It's rusty from gearbox area back but looks/sounds fairly solid. Can email pics if needed. Not looking for anything for it, happy for...

Up for grabs is a bit of shelving, Old Metal type. 6 shelves measuring 3'x2', 12 lengths of corner/leg measuring 4 @ 36", 4 @ 33", 4 @ 33" but made from two pieces, joined (badly) at 9". No bolts - m8 roofing bolts and nuts are very cheap in ebay / at screwfix etc. Collect from ilkeston...

I've mentioned this in a couple of threads before but now I finally have some photos of it. Could anybody please tell me what manifold/turbo/down pipe this is? Engine is a disco 200tdi. I am looking to clean the engine up and start measuring up for the inlet ducting and figuring out what's going...

Hi all, I'm just in the process of rebuilding my sills/'C' pillars on my 110, and have lost the bit of paper I wrote these measurements on. Basically just the width of the door aperture, either seal lip to lip, total width, anything really so I can cross reference before I weld. Thank you:)

Just passed a 90 on the westbound m50 near Ross, facing wrong way with an upturned ifor on the back, hay bales everywhere, mini digger on its side in the middle of the road. Thankfully driver and 90 looked ok. Just wondered if it was anyone off here?

Hi, could anybody help me identify this power steering pump please? It's fitted to a disco 200tdi engine, in a 110. More importantly I need a high pressure hose from it to the box. The pipe I removed had a tag fitted 'ntc6731' but after trying to buy this pipe from 2 well-known suppliers and...