Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Ianski

    my new straight through (video)

    nice tidy job mate and sounds well
  2. Ianski

    V8 Issues under load

    is there oil in the dish pots? I had probs one time running a 12v coil instead of a 9v coil threw a ballast resistor , that was playing up under load
  3. Ianski

    Ayresys Workshop Thread :)

    i like to see chains on machinery especially if it has wheel and can roll
  4. Ianski

    Damaged Rear Bumper

    i helped fit a universal reverse sensor kit to a van Easy and works well dont know the make but they are not dear The only thing you may have to buy is a drill bit big enough for the sensors
  5. Ianski

    My daughter wants to buy a Landy...

    looks good and sits straight can she drive it ok? she may need some big boots
  6. Ianski

    V8 Issues under load

    timing is set with vacuum pipe off and plugged and if the diaphragm is split it will draw air which will effect idle, Ill leave it to you lot
  7. Ianski

    Series 2 100 inch hybrid ?

    you can make the mechanics fit in my opinion make and break is the cutting down off the tub and making the body look right. there are some good tips on "a land rover is born" good luck and get some pics rolling
  8. Ianski

    V8 Issues under load

    did you set the timing with the vacuum pipe off and blanked, dose the vacuum unit stick to your tongue when sucked , basic setting for carb mixture ,all the way in then out 1 1/2 turns on both, adjust tickover with idle screw,fast to start and back off when worm
  9. Ianski

    Would this ruin my beast?

    I would definitely do it If I were you
  10. Ianski

    110 suspension am I mad.

    Buy some standard ones and if not happy make 200tdi Ayre buy them off you
  11. Ianski

    Wanted! My old 101 bumper! Bristol Area!

    Is it better than a tuned TDI? I bet its **** on the road
  12. Ianski

    Wanted! My old 101 bumper! Bristol Area!

    So you do alot on 7 1/2 tone trucks then
  13. Ianski

    110 suspension am I mad.

    I have fitted shockers to a disco on standard springs what are adjustable by air pressure via a tyre inflater I have fitted them to cars aswell A wast of time if you dont tow or carry any thing
  14. Ianski

    Wanted! My old 101 bumper! Bristol Area!

    I think a truck engine and box will be far to heavy , Even out of a 7 1/2 toner have you checked size and weight (Im only saying out of interest ,not being an arse )
  15. Ianski

    Wanted! My old 101 bumper! Bristol Area!

    What are the plans for the air system,
  16. Ianski

    V8 Issues under load

    is your ignition advancing
  17. Ianski

    Cant post a wanted thread, and I ned a part.

    Have you put your spare wheel on you bonnet and sat in your seat to see if you really want it there :D
  18. Ianski

    Glass to Blade fuse ratings

    If you post what circuit in turn you have wired then some one will tell you what fuse they use , I mean its been done so some one will know 10amp and 25amp should do
  19. Ianski

    Ayresys Workshop Thread :)

    how dose it get around that rule if its the same MOT test
Back
Top