Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. 3

    3.5 hotwire runs like crap

    Just can't get it run right (took to specialist which only achieved a bill- need to sort now myself or break the darn thing)- dying at idle when warm is back & now have a slight/partial miss from one of the cyls which makes it run a bit rough Have changed stepper, tps, leads/cap/rotor arm (all...
  2. 3

    Chug Chug Chugging V8

    Out of nowhere my 3.5 disco has started running very rough "chug chug chug" :( Its a bit intermittent- occasionally it will smooth out and run nicely but switch off and on again and its back! Checked all the hoses/leads etc- nothing is obviously missing or falling off. Stepper/throttle pot...
  3. 3

    Creaking suspension/steering

    Tat-tat-tat sounding creak when turning sharply to the right- anyone had this? Anyone here running yellow ****part heavy duty springs by the way? cheers
  4. 3

    Crappy idle- 3.5 V8i

    My 93 disco cuts out at idle and revs up and down a bit to keep itself going in P. If anything its worse when its warmed up Checked all the vacuum pipes, nothing lose or split, maf connected up properly. Lubed the throttle links- all looks ok does this sound like a bad stepper motor...
  5. 3

    Brakes don't work!

    Just got myself a '93 V8i, nice landy but I encountered a little niggle (as you do) on the way home- complete failure of the braking system At first the pedal went wooden for a bit then a little later it dropped all the way to the floor with only a tiny morsel of braking power right at the...
  6. 3

    EFI > SU's on automatic?

    Sort of a repost of the other thread sorry BUT.... is the kickdown linkage totally necessary for the carbs? Is there anyway of bodging something together if not? Can't find any carbs/manifolds for sale with the kickdown link thats on the haynes manual cheers
  7. 3

    Crank pulley...

    Hi, any of yous got any tips for removing it? My book of lies says to stick the car in first/low gear, but its an auto cheers
  8. 3

    ATF level?

    made a dozy mistake, delete please sorry!
  9. 3

    3.5 over-revving?

    Hiya, my 3.5 rangie auto is revving up to 1500 in P & N but is fine in all other gears. plugs/leads/air filter & hoses new. It was sitting a long while before I got it Any ideas? Cheers (I did a search by the way!!!)
  10. 3

    Manual > electric window conversion

    My passenger window has broken so I'm thinking about converting them both to electric while I'm at it... anyone else attempted it? Before I go pulling the door cards off does anyone know if the wiring will already be there? I've seen kits like this Electric Window Conversion Kit for 2...
  11. 3

    ATF/filter change- have to bend frame?

    Is changing the autobox fluid the same as on the classic rangie in that you have to bend the frame? I know you have to remove the crossmember first. Just wondering if I should leave it for a garage '93 V8 with the usual ZF Cheers
  12. 3

    Weird mini-breakdown?

    Was turning left onto a main road (slightly uphill) and my disco just died out of the blue. Started it back up a few times but it just died seconds later. Me and white van man (cheers mate!) push it round the corner. Started up a few secs later and fine all the way back. It was parked up all...
  13. 3

    3.5efi V8- cam/chain/lifters

    I'm hoping a new manifold will solve the ticking problem on my disco... If it doesn't, how much would be a reasonable amount to have a new cam, chain & lifters fitted on a '93 3.5 disco? Anyone here done it themselves & have any words of wisdom? Happy new year!
  14. 3

    Anyone got these wheel arches?

    Wheel Arch Kit 3 Door GAD044 Wheel Arch Kit 5 Door GAD042 Are they any good? Cheers!
  15. 3

    Odd non-start then start!

    Hiya, my '93 disco decided not to start out of the blue yesterday. AA man connected the battery directly to the starter and got it going. Since then its started fine! I think its related to my keyfob which stopped unlocking the doors (and the case is falling apart) the other day; I've had to...
  16. 3

    Good Specialists???

    Anyone know of a good specialist in herts/north london or nearabouts? Not paying main dealer prices for servicing but dont want an idiot playing with my rangie thanks
  17. 3

    Problemo Central locking/electrics

    I filled my '96 4.0 with a jerry can this morning and seem to have buggered the electrics. First off it locked me out and said "key code locked". I tried the EKA and it still wont start, the electrics wont work, the central locking wont electrically work and all this non-existant faults appear...
  18. 3

    Servicing

    Got myself a P38 rangie and it needs a service. Are main dealers worth the extra? Any ideas how much i should pay at an independant? and does anyone know of a good specialist in herts or nearabouts? thanks for any advice :)
  19. 3

    rovers for brains

    Hi all :) Just fulfilled a lifelong ambition to own a range rover. Have to wait a week for delivery and its driving me mad- cant get it out my head!!!. I'll post up some pics when it arrives :cool: great site btw
Back
Top