Search results

Hi guys, Bit of a stretch here but does anyone have a couple of the small allen bolts that fix the sensor into the hub. Happy to pay a bit. If you've got some, let me know. Cheers Rob

Hi guys, A quick question for you...how many filaments should there be inside the MAF? In an effort to cure a rough running problem while still cold, I swapped out/cleaned most of the sensors, including replacing the MAF and lubricating a stiff turbo actuator, I was doing this to rule them out...

Hi guys. Never done this before so I thought I'd put a few pics together for any other diy-er like me. Finally managed to source a new O ring for the lower low pressure inlet pipe attachment but it turned out not to be that after all. So, I ordered a reasonably priced new (rebuilt) pump from...

Hi guys, Probably a simple fix for most but I've never done a seat belt before and as the previous owners dog appeared to have chewed the ones in mine (not mentioned in the last four MOTs) it was one of the fail points on the MOT. Two reclaimed ones off fleabay fitted today, fiddly but easy...

Hi guys, The hunt for (sensibly priced) parts goes on. A long shot I know but does anyone have an offside headlight for the facelift model D2 td5 2002? Trawling the web and missed a couple, though with a bit of fastening damage they were very suspect and the ones on there now are silly money...

Hi guys, I can't seem to find a diagram showing the O ring/seal/washer that goes in-between the low pressure supply adaptor pipe and the bottom of the power steering pump. It's a small, slightly bent pipe with a diamond shaped plate with two bolt holes and the 'O' ring goes over the short...

Hi guys, Excuse me being a bit cheeky but I'm looking for a new bonnet for my Zambezi Silver D2 facelift td5 after colliding with a large deer up here in the West Highlands. I've called breakers all over and mentioned it on here before but still no luck. I'm not a mechanic or sprayer and...

Hi guys, Excuse me being a bit cheeky but I'm looking for a new bonnet for my Zambezi Silver D2 facelift td5 after colliding with a large deer up here in the West Highlands. I've called breakers all over and mentioned it on here before but still no luck. I'm not a mechanic or sprayer and...

Hi guys, Well the old girl failed the MOT so one thing I'd not done before was changing out the linkages between steering wheel shaft and the steering box. I'm not a mechanic, just an enthusiastic DIY'er through financial necessity and the guys who post on here and other Landy sites have helped...

Hi guys, Finally had a good look for the leak on my PS pump/hoses today. Gunked everything from the reservoir down to the pump, cleaned it all off and had a good check. The only leak I could find was at the base of the pump itself. Initially, I thought the fluid was leaking out of the lowest...

Hi guys, Rob here. Well, the smugness has finally come to an end after four years. My face lift Disco 2 has started to develope a problem. Several months back, she died on me 70 miles from the end of a long run home (Brighton to Fort William). Recovered by local company in Killin, Lixtul. One...

Hi all. I'm sure this will be considered a simple task but for novices like me it's not immediately obvious how to complete this simple task. Especially if you've owned a Disco 1. I've taken some pics at the pertinent stages, so I hope this will help. You will need: a small flat head screw...