Search results

hi guys i have just fitted a bran new full clutch kit on a 200tdi engine. this came complete with the clutch pressure plate thrust bearing and clutch arm. cost £100 all in. i also renewed the spiggot bearing. now after a week of it being on the vehicle when i press the clutch pedal down there is...

hi this is what im doing i have a 200tdi fitted in a rangerover classic bobtail. now i have rebuilt the engine and i have staged the turbo by putting a bigger compressor wheel in. now im told i need a dump valve to release turbo build up pressure. so ive brought one for a td5 off ebay as the...

hi all i have taken my fuel sender out of my 87 defender. there are 3 wires that go to it and i have taken the one off that operates the fuel light and earthed it down and the light comes on. but wen i connect it back on sender it dont work. i cant see any break in the connection and cant really...

hi all can some one tell me .can i get to the fuel sender by removing the drivers seat. on a landrover 90 1987. as the fuel light dont work.

hi guys. i have a lot of play in the rear axle on my 90 defender 1987. is it right i can take the diff out and take up play by adjusting something on the crown.

hi guys i have a landrover 90 1987. its got the ltt 5speed manual box and when im driving i go to select 5th gear but it just makes this high pitched noise it just wont select 5th. but if i turn it off it will go in then. all the other gears are fine what could it possibly be and is it hard to...

hi would ant one know the head torq settings for the head bolts on a 89 200tdi disco. plus also need the valve settings please.

hi all i have a 200tdi engine in my rangie bobtail. i am have the turbo up rated to stage2. now i know i need a dump valve to get rid off excess build up of pressure. but do i need a certain 1 or can i just make fit agood blitz one from a car.

hi all i have a 200 tdi engine and box in my bobtail. im not sure which clutch kit is the better one to buy. here are a list of ones ive come across. valeo. ap. borg and beck . taking into account i do off road once a month .i do use this every day as my commutor vehicle. plus some green...

this vehicle was a very light cat-d but has been fully repaired to a excellent standard. we have all photos we have taken b4 repair and after.your welcome to view them on viewing this vehicle . now please dont be put off as this has had no expense spared. this vehicle has guy salmon service...

hi every one will a 99 td5 transferbox fit on to a lt77 gearbox.

hi guys whats the name for the bearing that fits in the centre of the gearbox were the centre shaft comes out that fits in the centre of the clutch. as that shaft has up and down play in it.

hi guys last week put a message on here about a noise i got when pushing the clutch down and up sounds like a whirring noise. so i thought thrust bearing and so did ur selves think the same. any way box off today and release bearing changed. went for the final test and when i release the clutch...

hi guys got a 2003 td5. now when i start to push the clutch down when it gets half way and i hold it i get this noise like a dry noise best described as if the alternater bearing was going. it goes away if i hold the clutch half way and put some revs on. then it will go completely after i...

hi can some one tell me if a rangerover classic window screen will fit a td5 03 plate. just that ive got one if it will.

hi guys i have taken the abs unit off and have now repaired it.i have fitted it back on but did i bleed the system right as the brakes dont seem very sharpe. i started at n/s rear then o/s rear then n/s front then o/s front . went round twice untill all surplus bubbles were out. but stll feel a...

hi again. right today i have gone ahead and carried out the wire conversion on the shuttle unit. after fitting the abs unit back in place i now went for the test. turned ignition on and all lights come on then start engine and bingo all lights go out except for the abs light. so i now put foot...

hi guys i got the abs light on and the hd light on and the tc light on and the hand brake light wont go off. so i got it code read and it brought up front right abs sensor output to low. shuttle valve electrical failure. now just to put you in the picture it had the front driverside ripped...

hi guys i have just done the svs test on my abs modulator. i put 1 prong on my tester on pin 9 and the other on pin 6 brings up 3.0 then when i press both switches down i get reading 101 and then press indivigually i get 201 has this passed as the illustration im not to sure about. thanx

hi guys had a diagnoses on my td5 03 plate. as i had the 3 amiego lights on. come up with shuttle valve electrical fault. i have the link on this site how to fix that. now i had engine managment read. this is the faults it came up with. high speed crank synchronization lost (fault)...