Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. The Isle of Man Man.

    Slave cylinder pipe

    I am utterly confused, I bought an aftermarket slave cylinder and went to fit it yesterday but the rubber hose that goes into the slave cylinder doesn't fit as the thread on the slave cylinder is too small for the thread on the hose. I noticed there are two part numbers to the pipe: NRC7139...
  2. The Isle of Man Man.

    Whats your speaker setup?

    I was thinking of upgrading my speakers but then looking at a speaker thread, it all depends as well as where you put the speakers! The ones I had before I took them out where put just behind my ear on a piece of poorly held plywood, turn the speakers up past 8 and the plywood would rattle and...
  3. The Isle of Man Man.

    Ze' pedal will do nothing

    Just did a clutch change on me defender, now when I press the clutch in it springs to the floor stays but you can pull it up, it's like the pedal is just on its spring and not attached to the master cylinder, could it be just bleed the system and it'll be fine or is something else?:( Thanks for...
  4. The Isle of Man Man.

    Clutch cover

    I am quite confused at two points.. My first point is which bolts do I undo the ones in blue or the ones in red? The Haynes manual says not to disturb three bolts in the side of the clutch cover but I cannot tell what these 3 bolts are? My second problem is how do I stop the clutch from...
  5. The Isle of Man Man.

    Bellhousing bolts

    In the middle of doing me clutch, I came to undoing the bolts on the bell housing and I was wondering if at 12 o clock there is a bolt there, as it seems there is one but without a head! before trying to drill it out and what not I want to make sure this is in fact a sheered bolt? Thanks :D
  6. The Isle of Man Man.

    I have seen bad but this takes the biscuit!

    LAND ROVER 110 PICK UP FOR SPARES ONLY on eBay (end time 23-Mar-11 20:33:03 GMT) The seller does not know the year of the Defender or even what engine is in it! There is no V5 or Vin number! I wouldn't touch this LandRover with a 10 foot barge pole :doh: 288000 miles as well on an unknown engine ;)
  7. The Isle of Man Man.

    Radiator/engine removal

    Done me research and came up confused! Right well I am in the middle of removing me engine out of my Defender and I am up to the stage where you have to remove the radiator, now I have been told it is necessary to remove the radiator, but is it? I mean remove all the hoses and pipes, so...
  8. The Isle of Man Man.

    Two body work questions.

    Right well I hate gaping holes in my Landy, if I did I would of bought a jeep. anyway! I was wondering how to repair this old slug in my nice lettuce: Look at that horrible repair that the owner before had done! :mad: Would I buy these?: 1 Pair of Landrover Defender Bulkhead Repair Panels on...
  9. The Isle of Man Man.

    Clutch replacement

    I have a dilemma. I wrote on a local forum about if someone can replace my clutch at a lower price than a garage, I had someone who told me of a Land rover enthusast mechanic that can do it who is good, then someone said he was dodgy. I then asked people how hard is it to remove the clutch...
  10. The Isle of Man Man.

    Land Rover DIY annoyances

    Just being a curious George and I don't think anyone else has posted anything like this. what has been the most annoying thing you have had to fix that has broken or needed sorting on your Land Rover? Need it be a Series, Defender..ect Atm the most annoying thing was the core plug as my...
  11. The Isle of Man Man.

    Sluggish on hills

    I was driving me 300tdi Defender today and she was driving fine on downward slopes and flat roads but any hills and she wouldn't put past 30mph any gear just sluggish power output, the hill was just a casual slope. Thanks for any help, just doing my head in holding thousands of cars up flashing...
  12. The Isle of Man Man.

    300TDI rear core plug size

    Hello. The rear core plug on my 300tdi Defender is fecked, I was wondering the size of the rear core plug as I tried all kinds of sites and can't find the size of them. Thankyou! Oh yeah forgot there was two, its the bottom one NOT the top one if they are diffrent sizes.
  13. The Isle of Man Man.

    Engine overheat

    I have a problem where I was going for a long run in the Defender and it started to smell of heating anti freeze, so I pulled over opened the bonnet and it was steaming a bit, dripping what looked to be anti freeze but I couldn't tell, the temp gauge was reading a bit beyond half way. Love some...
  14. The Isle of Man Man.

    New to the Land rover world

    Hi I am Adam, I am 17 live in the Isle of Man and been interested in Land Rover Defenders since I was a wee boy. Just yesterday bought myself a Land Rover Defender 90 300TDI hard top with massive mud tyres, uprated turbo and changed suspension and shocks. I love driving her everywhere and named...
Back
Top