Search results

I did try a Google search, all getting some fairly conflicting views. Have heard you need to use the cam from your 15p engine but other than that it can be done

Seems nobody knows

Was recently reading that a 10p engine block is actually the same as a 15p engine block, is this case?

Ok had engine put back together, new cylinder head, new head gasket, engine still ****ing out water, at a loss now where to look

Noticed for a while that there was exhaust gas leaking from the back of the engine, assumed it was manifold. Head gasket / cylinder failed ( still waiting to find which) When I was visiting the garage to see if they had started, was able to get look at monifold and it's looks fine, certainly no...

All the time, the reason I ask is to ascertain whether or not the.cylinder will need replaced

My d2 Td5 is blowing alot of white smoke from the exhaust and drinking coolant suspect it's one of the above and sure way of finding out which it is without stripping it down?

Rockingham landrover are very very good helped me out of a bind a few times very friendly staff

I happen to be a disco 2 owner and yes it's had it's problems but then it had 130k miles on the clock so problems were to be expected, I'm guessing these people brought high millage discos to and just expected them to be perfect.

Stumbled across this website by accident title says it all Really Land Rover Discovery Review (Reviews) and Report, Land Rover Discovery Recall

Have a ambient pressure fault showing on my hawkeye have replaced the sensor in the airbox a couple of times and have not been able to clear the faults. Noticed that the lid of my airbox is broken slightly so is not sealing properly. Could this be the reason why the ambient pressure fault will...

Did do some wading, have snorkel and wading kit which routed up the inside of the snorkel. Didn't fit wading plugs though, if I'm honest I'm not entirely sure where they (yes I am a noob). Wading kit I have are axel and gear box breathers is there anything else I need?

Just had to replace my starter motor and as the title suggest when it was removed water gushed out, correct me if I am wrong but I thought the starter motor would be sealed from the outside elements, have I missed something?

Well only thing that has happened is that I went wading in deep water and got water in the airbox which has caused these faults so I am at a loss as to how to Clear them

Any ideas on the part number for the wiring loom that connects the sensor in the airbox, boost modulator etc (4 pin not 3 pin)

The faults appeared after i went wading, airbox was not as sealed as i thought and some water did get the airbox

What is the part number for the wiring harness that goes to the ambient sensor?

I was thinking along the lines of wiring

Keep getting two faults on the hawkeye, 3007 ambient pressure low fault and 3039ambient pressure fault active I know these are to do with the sensor in the air box and have replaced the sensor twice but the faults won't clear, now at a loss as to what to do now, any ideas would be greatly...

He does other winch bumpers. DISCOVERY 2 CLASSIC WINCH BUMPER: | WS4x4 End of the day it's personnel choice what you out on your wagon but customer service goes along way and the bloke behind Ws was dead on with me. When I was looking at winch bumpers some company's where looking as much as...