Search results

Update Fitted another new water pump ( chucking everything at this !! ) Have noticed not only does top hose get hot but no presure but now took outlet hose off matrix and there is no flow at all

The new head came with the metal towels

Yes I've tested the original one I took out and the two new ones and all open and close

Oh and with hise in header tank and bleed out no bubbles Leave hose running and start engine and continues stream of bubbles Asuming head gasket Had new head almost 4 years ago

System holds 22psi for 30 mins in pressure test When running top hose is soft but hot and heater cold unless doing around 70mph higher the revs hotter the heater gets slow down heater gets cold So far new rad New matrix New water pump New cap New thermostat

Is there any way a cheap crap britpart water pump can let in air ?

Forgot to mention it's a new cap

Ok Not been on here for a long time So hello again So u have a problem with my defender td5 Start off with heater going cold when I was in traffic or stopped at red light So I changed the thermostat and water pump , made no difference so I changed thermostat again as thought could be dodgy also...

If i remember there is a plate with nuts welded to it for the door hinge bolts that comes out, if there are tubes im sure there not plastic To remove unbolt at bulkhead, bolts through the floor and at top of b post to roof, and c post is two bolts and some rivets, also seat belts etc if any...

If i remember right they came out, you do mean the plates with the nuts on ? As for T wash think thats covered now:)

I used my ones . didnt buy new !!!

Dont forget to wash with soapy water and T wash before painting, the pic of it black is after T wash

I galv'd mine and the C pillar

They do get tight in wales ;)

Err dont go anywhere near my rear door........EVER...........:eek:

Was all under control:confused:;):D

Nothing wrong with my BBQ's:rolleyes::D

Im free if theres a space left:)

Well done that man:)

From thursday to sunday