Search results

Just wondering if anyone knows a good place to get the special tools for the diff rebuild, I have already got the pinion locknut special tool from paddocks, but need the torque measurement tool and the support frame. The only place I could find these was on JLR Tooling and equipment shop and...

Just wondering if anyone has successfully disengaged the propshaft from the haldex/diff. It is a 2011 f2 SD and if so how did you do it. I've seen a few threads/videos on the earlier freelanders but not on my one. I need to replace the pinion bearing in the diff which will be a first for me but...

it is time to replace the rear wheel bearing on the old girl, I've been doing a bit of reading and reading about special tools etc, is it possible to do this job with just a press or do I need these special clamps, having said that is is more than like to escape grief if I buy the whole...

got your attention, good, now me and electrics go as far as if I get hold of one wire and then pick up another wire my eye balls start spinning. I need to fit new fog lights on the f2 (lenses is bust on the old ones) Powerful Uk aren't shipping out to Sweden at the mo so i found a Euralight set...

To all you wonderful gurus out there. Okay have a 2010/11 F2 SD4, 174000 kilometers on the clock. When I first got it it would do 6.5/6.9 Lt to the 100 kilometers this has now crept up over the past 2 yrs to 8.8/8.9. so about 25mpg. I generally use it to drive into town a distance of 15...

Just done the 10 yr service on the old girl, well old might be exaggeration, she comes into her teens in December, anyways did the timing, auxiliary belts, new pulleys, tensioners, water pump, general service, came to start her up, won't start click click , put the gap tool on to her the dreaded...

Just like to post a thank you to all and sundry who post answers, fixes, and just general knowledge on this site, well done guys and girls pat yourselves on your back, you are appreciated.

Hej Guys and girls, trying to find parts to replace my ride height sensor array apparently part number LR001706 is the the actual sensor but i am having trouble tracking down the wiring kit to splice new wires/connector to be able to connect said sensor. Necessary because the pins have all...

Just done the oil change on my F2, normally do it at a mate's garage and use his tools. Today decided to do at home in my barn. Must of used every combination of sockets and wrenches I have to get that pesky oil filter off. Reckon the guy who designed it must of been a magician, and was...

Hej Love my freelander 2 SD but the one grumble I have is the lack of thigh support doesn't help on long journeys. The seat I have has manual adjustment with only a lever that that controls up and down tilting and the under seat forwards and backwards movement. The question is is there a seat...

Hej, been trying to sort out a fault on the ride height sensor on my F2 SD 2010, the gap OBD11 was telling me something wrong with earth on height sensor. Went to have a ganders saw connector to the ride height sensor though okay will disconnect and give it a good spray with electrical cleaner...

Have a freelander 2 2010 and the seat keeps on dropping, It's a manual operated seat action with a little lever you pump to raise the height. If I have it on the highest point it will drop over a couple of hours to its lowest point. Are there any fixes for this, something I need to tighten...

Hej all you wonderful people, As the title suggests big service coming up on my 2010 freelander 2, been quoted over 500 pounds for just changing oil and filters in gearbox and the transfer box can't remember the abbreviation. Couple of questions, is there a cheap pump you get hold of to do...

Any one point me in the right direction as to where I can get hold of the eccentric bolt, cam washer and lock nut for my freelander 2 2010, been trawling the internet trying to find a place that has them, no problem finding bushes but I broke the bolt trying to remove the link arms to change...

hej wondering if I can get a bit more of a hand on changing oil seal on the diff, it's the seal on the diff to the half shaft, reading up on fraggz's post and checking on the repair manual, fragga's post say just undo 2 bolts on the arms to subframe pop out the shaft with a couple of screw...

Coming near to the time when the horse will need a new set of summer tyres shoed on. The question is do I use 103V VOL or 107W XL I'm looking at getting a set of Michelins Latitude sports 3 the higher load tyres are 20 quid cheaper per tyre and I was wondering what the difference would be...

looking at new tyres for the wagon, want to reduce diesel cost so looking at low road resistance, and want low road noise as well I have come come up with these choices anyone got any experience of these on a freelander 2, don't do much offroad but live out in the sticks in the north of Sweden...

Got to do an oil change on the fl2, its a 2010/11 model, 120,000 k on the Clock so another 30000 before the big 150k service, should I do anything else whilst I’m tinkering with it? Obviously gonna change air filter and oil filter as well but is there anything else to check out. Want to keep...

try to post this in common issues, but not grown up enough so not enough privileges, Had a couple of days of -25c temperature and had to take the Freelander into some deep snow to get some hay out of a barn, no problem with the brakes. Temperature rises to a barmy -5 to -9c ish went to drive...

Put a Calix engine heater on the car today and noticed that there was a fair bit of oil residue on the front of the engine on what looks like a breather tube coming down the outside. Anybody got any ideas on what it is.