Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. E

    Transfer box input gear

    Is the modus operandii to remove the cover plate on the pto output then the bearing carrier to reveal the gear then pull it from the casing or is there other works to do first when changing the gear to a new crossdrilled ashcroft unit. John
  2. E

    Vibration

    My 200tdi has a vibration at exactly 2000rpm most annoying any ideas truck has new engine and gearbox mountings which has improved it but not gone. John
  3. E

    What headlights

    As the title suggestions for replacing the original disco1 200 tdi headlights John
  4. E

    Ridding the backlash

    Took the bull by the horns today fed up with the excessive backlash caused by the wear in the gear and shaft from gearbox to transfer box removed the cover then the bearing housing and outer track cleaned the inside of the gear and the end of the shaft with a steam cleaner airline to dry then...
  5. E

    Dmf v solid

    Dmf is vibrating somewhat so a change is imenent thinking of solid flywheel instead but would like to hear from users themselves on this subject so any experiences much appreciated John
  6. E

    Vibrating yd5

    Vehicle is a 2000 td5 manual it has started to vibrate at a shade over 2000rpm whether in gear or not i thought it was the engine mountings and have replaced them with genuine articles and no difference any advise much appreciated vehicle had a new clutch and flywheel about 4500 miles ago. John
  7. E

    Unlocking problem

    Think i know the answer but just want other views,my disco is a problem to unlock with the remote after it has been left for a few days,after a short run everything is fine my thoughts are the battery is slowly dying and after a few days the voltage drops a bit hence the less than instant...
  8. E

    heater flaps question

    i have a d2 td5 200 vintage and got a feeling the flap that controls the flow of air through the heater matrix when heat is required or closes it of when cooling is required is not operational, heat is no problem but when cooling is required cant get it cool even with the aircon, which is fine...
  9. E

    Intercooler upgrade plus other questions

    *Intercooler choice plus other ?s Going to fit an uprated intercooler to my 2000 td5 with air con what are your recommendations,plus at the same time going to replace the aircon drier which has seen better days again help sourcing appreciated,lastly a heavy duty bumper no winch got a few ideas...
  10. E

    Sort of thinking of a change advise sort

    As above i am thinking after many many years of the green oval ownership evrything from 1949 series 1 to my td5 disco question is i am being drawn to a bmw x5 basically as i am getting older fixing faults is less attractive,however my budget including what i might get for my disco is around 7000...
  11. E

    Hawkeye

    I have a series 4 hawkeye perfectly good tool but do the illustrious forum members know if it has been upgraded and if it is possible to upgrade the older model,thanks for any info. Engineer:):)
  12. E

    Weekend work

    Bit the bullet over the weekend got the front of to sort the aircon leak usual place clip on the bulkhead with the foam round it,plus got out the inter cooler for a good clean out suprising the amount of carbon and black sludge the solvent dispersed,plus greased all the chassis bits you cant see...
  13. E

    Td5 door unlocking regime change

    As above what is the path through hawkeye to change to all doors opening at once thanks for any advise Engineer:):)
  14. E

    Hawkeye and keys

    Do the illustious members of this forum know if hawkeye can reprograme keys as yet,if so can my hawkeye4 i think be upgraded to allow this function,thanks for any info. Engineer:):)
  15. E

    Tow ball mounted winch

    Need advise on what towball mounted winch to go for to be used for a bit of logging work and the odd self recovery on the marsh any help much appreciated. Engineer:):)
  16. E

    Flywheel sensor

    What would be the symptons of a faulty sensor the one that is in the bellhousing and presumably reads the engine speed and position td5 by the way thanks for any help Engineer:):)
  17. E

    Clutch noise when cold

    My disco has had a new clutch including flywheel on the odd cold morning we have had the engine pulses are transmitted into the cabin very clearly when slipping the clutch to move off after about two minutes this dissapears clutch works fine good pedal etc. any thoughts Engineer:):)
  18. E

    Waste gate control valve

    Is it neccessary to have the vacuum side of the valve connected i asume it is to open the gate should the inlet get slightly blocked however i would prefer to connect the pressure pipe direct and eliminate the valve. Engineer:):)
  19. E

    Injector anomally

    Been playing with hawkeye and no. 3 and no. 5 injectors have roughness spikes up to -17 on the overrun other wise fine,truck runs fine smooth etc. Good mileage so i imagine its a case to much knowledge, just drive the thing. Engineer:):)
  20. E

    Overhead exhaust

    Has anyone fabricated an overhead exhaust i.e. Snorkel but for exhaust pictures would be great thanks for any help Engineer:):)
Back
Top