Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. S

    P38 overheat

    Hi guys still got bother with my 01 P38 diesel overheating its had new fan, waterpump, rad, stat, all hoses and new expansion cap, tank coming today but still boiling over and coming out of tank and over flow will the new tank cure it or is it really just the head? thanks Steve
  2. S

    What have you done to your Landie today.

    fitted a new rocker cover gasket and stopped the oil leaking from the vacc pump housing now got to find out where the water is going to(expansion tank sounds like a kettle) also how do I slow tick over down its a P38 diesel runs perfect but ticks over at around 750-800
  3. S

    over heating at speed

    I've got a diesel that does the same its had new rad fan water pump and stat water was leaking from stat housing but isnt now but using water also took vacc housing off for easier access to stat now got an oil leak too changed oring but still leaking oil there is another seal in rocker cover...
  4. S

    BMW M51 2.5 td engine gurus range rover p38 (youtube clip)

    got one ordered thank you
  5. S

    BMW M51 2.5 td engine gurus range rover p38 (youtube clip)

    thanks thats what i meant, i knew it was a pump as its made by pierberg and it leaks oil!how would I know which one its a 2001 dse thanks again
  6. S

    BMW M51 2.5 td engine gurus range rover p38 (youtube clip)

    hi sorry to but in on the thread but I have solved a leak from the stat housing on my 2.5 but to make life easier i removered the oil pump housing above it and now i have an oil leak instead it appears the o ring is shattered any idea of the part number or size to get a replacement thanks steve
  7. S

    What have you done to your Landie today.

    fixed a water leak from yhe stat housing on my 2.5 P38 got and created an oil leak from the oil pump above any ideas of the o ring part number
  8. S

    What have you done to your Landie today.

    trying to break in to my 97 P38 disconnected the battery didnt realise the key was in the ignition, all doors shut wanted something from the boot wouldnt open so reconnected the battery and the central locking fired locked the lot and no spare key and my local stealer wants €250 for a new key...
  9. S

    Nuts, Screws, and Bolts

    is there a general size for the 4.6 manifold to downpipe studs as i have to change the cats and cant believe that I'm not oging to sheer at least 50% of them? Any ideas as to the best way to go about it? thanks
  10. S

    Head Gasket Cost 4.6 V8

    thanks for your help
  11. S

    Head Gasket Cost 4.6 V8

    sorry still being very thick where can i get one fleebat etc is giving me daft answers
  12. S

    P38 newbie

    hello and welcome, when you work out this site please tell me I posted a thread once but havent got a clue how to do it again. good info here tho what do i need to do to change the gaskets on the valve covers on a 4.6, is it a special tool?
  13. S

    Head Gasket Cost 4.6 V8

    I know this is slightly off track but is there a special tool to remove the retaining studs on the valve covers so I can change the gaskets on my 4.6 thanks having a thicko day
  14. S

    Fuel Pump??

    My fuel pump went when I ran out of petrol, its awful to drop the tank, infact i could only get four out of five nuts undone. cut the floor, I did eventually, cos even if you can drop the tank you wont have room to remove the fuel lines as they will be corroded to hell. By cutting the floor you...
  15. S

    no fuel

    oh yes is there anything else i should know???
  16. S

    no fuel

    fixed the fuel pump easier to make an access panel cos if your fuel lines are anything like mine were it would be very very difficult to remove from pump while dangling the tank. now to change the valve cover gaskets, is there a special tool cos i cant seem to find a socket to remove the...
  17. S

    Are the retaining bolts on the valve covers on a 4.6 E10 female torx sorry seems like a silly...

    Are the retaining bolts on the valve covers on a 4.6 E10 female torx sorry seems like a silly question I know but i'm having a thicko day thanks Steve
  18. S

    no fuel

    I wish ten minutes 4 out of five nuts undone one bitch to go then filler pipe then get the pump out, oh yes need a new exhaust now aswell any ideas for a good reasonably priced system guys thanks Steve
  19. S

    no fuel

    I can suck fuel through from the tank to the inlet feeds, is it the fuel pump and why has it gone since i ran out of fuel?
  20. S

    no fuel

    hi I've got a 4.6P38, I ran out of fuel put a can in no joy since put two more in plenty spark but no petrol any ideas and help most gratefully received Steve
Back
Top