Search results

For some reason i cannot fill the (petrol) fuel tank on my 90 over half way, when the level gets to the top of the inlet pipe which is just over half way up the tank it stops and wont take in any more fuel. At first i thought it must be the breather pipe blocked, so i disconnected it and poked a...

Years ago i rebuilt an early 90, galv chassis, 200tdi, metalic paint, everything was galv or stainless, cost me a fortune. Had it valued by a 3rd party company, they valued it at 12k, sent me the report which i forwarded onto the insurance company. I think it cost me £150 for the valuation.

Since i was a kid i wanted a V8 landrover with a supercharger, my 90 only does about 500 miles a year and i enjoy working on it. Something nice about having a supercharger sat on to of the engine!! Any advice appreciated

I have done a forum search but not really found what i was after. I am thinking of fitting a supercharger kit to my 3.9efi, im pretty sure i will have to chip ECU with a tornado chip for the extra fuel but what else will i have to do? Will it have to go on a rolling road and be set up so its...

This is what mine looks like, pump is on the right.

I picked up some wolf door bottoms at billing for £70, in very good condition with nice door cards and they fit the 90 door strikers, got some aluminium door tops on ebay for £100, far better than the steel ones that rust from the inside.

I made mine from lorry mudguards on ebay, cost £30 and half a days work with a heat gun, pop rivets and a tube of sikaflex. They are 5 inches outside the bodywork and look pretty good.

What engine is it, what year? You sure its the engine missing and not something else, a problem in the running gear maybe???

Is it speed related or at a certain RPM?

i have 315x85 R16's on 8" mach 5 rims, no problem fitting them and they look good

With engine running, foot off the clutch and gearbox in neutral you should be able to feel if the main shaft is spinning by gently selecting a gear. If you feel nothing then you can assume there is no drive between engine and gearbox, if you do feel the shaft spinning with a slight knock or...

Anyone have any experience with the ECU chips, is it worth spending £300, does it make that much difference? Was thinking of getting the cyclone chip for my 3.9efi.

Watching a janspeed turbo and manifolds on ebay at the moment, i contacted the seller and asked what else needs to be done to the engine when turbo is fitted, his answer was "nothing if you keep low boost pressure". Is this right, and if i have to run low boost........is it worth fitting?

Just fitted the 1:1.4 box and what a difference, nice up through the gears and pulls like a train on the hills. Checked the serial number on the old box and it was a range rover 1:1, thanks guys

I am thinking of fitting a Janspeed turbo to my 3.9efi, what exactly is involved, other than fitting the turbo what else has to be done?

I made my own using a pair of mudguards from a 7.5t truck, cost me £30 on ebay and half a days work. You can cut them as wide as you like.

Correct me if im wrong but wont a disco transfer box make it higher geared? Is a 1:4 transfer box - 1rpm in = 4rpm out or vice versa??

I have just fitted a 200tdi disco motor into an early 90, i had to drill and tap and move a few of the studs, no great problem, not sure if you would have to do this on a defender 200tdi, someone on here will know.

Does anyone know what transfer box would be best for me? I have a 3.9 efi 90, LT77 gearbox, due to the 315 tyres i have fitted she is now geared a bit too high, at 2500rpm in 5th gear i am doing just over 70mph. Im not sure what transfer box i have now, cant find any markings on it. Does anyone...

I have this personal registration for sale, looking for about £50.00 and it includes assignment fee. Anyone interested send me a message or call 07868 152989.