Search results

Hi folks, I am currently fitting a hand throttle with genuine bits to my 90 but I can’t source the cover for the bracket in cab. See pics. (No5 on the diagram) Does anyone have one lying around I could buy? Cheers, Ben

Hey folks, hope you are all keeping well? Does anyone happen to have an intercooler pipe from an ex utility Td5 which had one of the travel power alternators fitted and are willing to sell? Its the i/c-turbo nearside one (two rubber pieces and the metal piece). If you have/had one you’ll know...

Got Td5 sorted, still got issues with the 90 rear drum brake. Never ends. The story goes like this... Nearside rear brake drum catches the shoes when rotating by hand. Tight-slack-tight-slack etc. It’s very evident under braking, I can feel a pulse through the pedal and when braking heavily the...

G’day I have a ex utility 110td5 which doesn’t like to move after being parked facing up hill for a short while. It starts ok but when pulling away it wants to stall, no power being delivered from the engine whatsoever. After 30 seconds it springs back to life and runs fine. No odd pump noises...

Hi all, Just recently bought an ex western power 110 td5 with most of the 110v Electrolux travel power fitted but was missing the generator which I’ve just picked up, however I’m not sure how it fits in the engine bay. I’ve got a bracket but it makes no sense. If anyone has one fitted to there...

Evening all, need some advice regarding door locks / fitting. I’ve just bought a pair of early 90/110 doors from the bay with lift up handles and wind up windows (with single outside handle). I think the lock part number is MUC2290. Anyway, the locks seem to be in good condition all be it...

A up all, My 200tdi def has recently began to use an excessive amount of fuel, way more than normal. Usually I get 230-40 miles per full tank with general driving and occasional towing, now I’m averaging 170 miles per tank. Only thing that I have done prior to noticing the change is a full...

Been trying to upload a video from my iPhone but after selecting the video it compresses the file then says: "The following error occurred. The uploaded file does not have an allowed extension" How do I get around this? Thanks

Recently I fully rebuilt my 200 engine which runs as sweet as. No smoke whatsoever or leaks which is surprising. However I have a fairly loud tapping noise which appears to be coming from centre, lower front of the engine. Myself and a landy builder have had the stethoscope on trying to locate...

Hi all, just fitted a 2nd hand ip to my 200 engine. I have moderate ammounts of black smoke from 1/2 to full load with lower power than with my previous pump. My turbo is producing 12psi on load. Any ideas on what adjustments are necessary to reduce smoke but increase power to what it was...

Hi all. I'm after a hydraulic snow plough for a Land Rover Defender. Either a Bunce or Schmidt would be good. Thanks for looking.

As above, weather warning issued for snow on Boxing Day!! Happy me (and others lol)!!!

A up, Just got a second hand lt77 for my 90, it has a genuine LR recon plate with the following numbers stamped on, can anyone identify them for me please? And who reconditioned Land Rover boxes for LR or was it in house? RTC6999R PB54506 The last number is also stamped where the...

As above, I'm looking for a genuine radiator and frame for a 200tdi defender. I do have the correct intercooler so that's not essential but will happily have another if it comes with the rad. Thanks for looking folks :)

Hi all, anybody got a good genuine 200tdi defender rad pack for sale including frame? Thanks folks.

As the title says, has anyone got a genuine 200tdi Defender air filter housing and a slam panel for the same engine they would be happy to exchange for a few beer tokens?

A up all, as the title suggests my problem is when going down hill either in low or high box, first gear will work its way out, no crunch just pops out into neutral. All other gears are fine (even reverse). I have found no information anywhere relating to my issue. The box is off a military...

A up all, anyone fitted the above to their Defender with a pre td5 engine? I have been thinking of fitting one to my 19j (2.5TD 90) to aid winter starting. It does start well from cold considering the age but I wold like to just help it along that bit more when its really cold. I have...

Hi All, Does anyone hove any pto shafts knocking about for the Superwinch H14, particually the front one that connects to the winch? I have the fairy pto and shafts which I assumed would fit the Superwinch H14 which apart from the coupling shaft (which is around 3" too short) fits fine. I...

Hi All, Does anyone know of any current part numbers for the universal joints for the above winches. One of my uj's are bolloxed (yokes worn) and in need of replacing but I cannot find any relevant part numbers. Apart from the ones in the manual. I spoke to the Superwinch technical support...