Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    L322 54 plate with suspension fault.

    Thanks for replys it is appreciated. Sorry for delay in responding. Im leaning that way too. I checked the pressure valve by the compressor to check it wasn't blocked, no worries there. I dont suppose there is a way to check the compressor? Its running i know that much but maybe if it is...
  2. M

    L322 54 plate with suspension fault.

    Hi everyone. After some advice and help. The wifes Range rover seems to have developed a problem with the air suspension. No warnings on dash but the suspension will not go from low mode to normal or off road mode by selecting the switch on the dash. It will flash and tell you that you...
  3. M

    heavy klonking sound underneath

    Sounds like u/j's or A frame ball joint..........
  4. M

    Water Ingress

    Cant beat the taste test as horrible as it is!
  5. M

    300 Tdi Problems

    Why not fix the fault? Or get someone to take a look. With the money and hassle you spend swaping the master cylinder and getting new brake pipes made up, it may only cost an hours labour. If however your minds made up, then the only parts that should need changing are the...
  6. M

    water leak

    Do they have drain tubes fitted on them? Check they are not blocked. Try vaseline on the old seal.
  7. M

    TD5 2nd gear crunch

    Drive a few more see if they all do it!
  8. M

    overfinch discovery

    best route is to go to a custom exhaust place like powerflow or longlife, they will make you a replacement in stainless steel at a fraction of what Overfinch will charge. Plus, they give a lifetime warrenty on their parts.
  9. M

    td5 headlights conversion

    Heres a before and after on my discovery took me about a days work........ A pain in the arse, yes, but the end result is a good one. Both my lights were off ebay at about 50 quid each both were leaking water into um. so i resealed um. had to get one of the under trims from Land...
  10. M

    radiator adaptors

    take your hoses off and take them along with the radiator to a hydraulic fittings shop like Pirtek, they will either make you some new hoses with the correct ends or provide you with an adaptor type union.................
  11. M

    abs

    Yes mate, this is correct although i thought it was 5mph.....
  12. M

    12s socket wiring?

    its only goota have a diode in it.........
  13. M

    it just gets better and better

    any machine shop can skim a head, look through a yellow pages for engine reconditioners and that should sort you out!!!
  14. M

    it just gets better and better

    I think a decent make head gasget should do the trick, clean the block and head up and fit a new one, its up to you but it maybe worth getting the head skimmed whilst its off.
  15. M

    Require a favour, Disco ser1 1998 ABS

    dunno if this ones the same year but follow this link and have a read http://www.landyzone.co.uk/lz/f8/300-abs-light-27043.html
  16. M

    Require a favour, Disco ser1 1998 ABS

    I dont know a lot about the ABS system on this vehicle, but my manual says if you remove a sensor you have to replace the seal and mounting bush. The sensor sets its own air gap when refitted, so shouldn't damage the sensor by removing it. Im sure you can get a blink code somehow which should...
  17. M

    foooooooking clunks pi--ing me off

    dunno how to tell m8, it could be, well worth considering and makes sense, bit hard to check though.... New box i guess........ covers all avenues then.....
  18. M

    foooooooking clunks pi--ing me off

    bottle jack LOL........... Revs only dont seem to change TBH, not that i have noticed..... Front shafts seem ok, im thinking its the transfer box........ Gearbox has been a bit crunch on the 2nd and 3rd so il be on the look out for a recon...
  19. M

    foooooooking clunks pi--ing me off

    Cheers folks i will have a look tomoro, if it is the box its not the end of the world..... Not too hard to swap!!! I will check those flanges first :-) I will let you know how i get on!!
  20. M

    GOOD suppliers!

    Parents live in France they never seem to have a problem with paddocks, parts seem to arrive quick, if i send them a letter though it seems to take forever to get there....
Back
Top