Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. tombardier

    metal lathe

    Can be seen here: http://pages.ebay.com/link/?nav=item.view&id=261453585245 Got a bigger one :)
  2. tombardier

    1996 Jap Import 300TDI Auto on Ebay

    Land Rover Discovery 300TDI Auto - 61k - MOT/Tax - Jap Import. | eBay
  3. tombardier

    300TDI Disco Parts + More

    Hiya, All items are near Westbury on Severn, Gloucestershire. Can deliver a reasonable distance, would prefer collection - might post, but preference given to locals :) '96 300 TDI Disco EDC injection pump - will need timing - £50 '96 300 TDI Disco PAS pump - good condition - £50 '96 300...
  4. tombardier

    A few items - 300tdi IP/PAS pumps/Oxford Welder + more

    Hiya, All items are near Westbury on Severn, Gloucestershire. Can deliver a reasonable distance, would prefer collection - might post, but preference given to locals :) '96 300 TDI Disco EDC injection pump - will need timing - £50 '96 300 TDI Disco PAS pump - good condition - £50 '96 300...
  5. tombardier

    '96 300TDI Boot Floor

    Well, I've done a boot floor before on a 200tdi, and it took me a while as it was an absolute wreck. I've been putting it off, but I thought it was about time I got to getting the carpet up on mine to see what it was like. I didn't really want to until I could commit to actually replacing it...
  6. tombardier

    Bits for home-made lathe

    Greetings, I have a home-made lathe, wihch I actually acquired from someone else. I think they'd taken it as far as they were going to, and I want to continue to make it better, as I just can't afford a good lathe, and if I can get some use out of this one, then I've got time to save up a...
  7. tombardier

    300tdi edc auto wastegate stuck closed and maf removal

    Greetings. I think my turbo wastegate is seized in the closed position, causing over boost and then causing the edc to cut fuel off. It manifests when I floor the throttle up hill getting to about 3200-3700 rpm. It'll hesitate for a moment then go again, and repeats that several times. It's fine...
  8. tombardier

    does anyone know if this rotary coupler will fit my 300tdi auto?

    Afternoon. The rotary coupler picture is part number AMR5631 and it's from a '97 p38 4.6. I'm just wondering if anyone knows whether it would fit my '96 300tdi auto discovery? It looks like it has the three connectors for the horn, cruise control and airbag, and mine is almost certainly...
  9. tombardier

    Think this might be on a disco chassis

    https://twitter.com/peterbcooper/status/275865966796238848 Cool :)
  10. tombardier

    Disco 300TDI Auto - Wanted - Genuine or Fitted Rubber Floor Mats

    As subject really :) Decided that the carpets aren't welcome any more after seeing what they were hiding, so they're going, and I just want to have rubber mats. I'm in Blakeney, in the Forest of Dean. Cheers!
  11. tombardier

    Air Arms S400 Classic w/ Hill Stirrup Pump, Scope, Bag + Rowan Multi-Shot Mag.

    NOW SOLD - CHEERS! Hi there, It's been a while since I used my rifle so I'm putting it up for sale. First, let me state that it's an anti-tamper S400, and _someone_ idiotically attempted to half drill out the anti-tamper bolts (in their youth), which I've tried to show clearly in the photos...
  12. tombardier

    300TDI Rubber Floor Mats

    Hi there, I've removed the carpets in my 300TDI auto after they got wet, and the sound-proofing just didn't want to let that water go! It looks like I got them out just in time, as I've just got a little bit of surface rot to content with, and a little bit of proper rot in the drivers footwell...
  13. tombardier

    Discovery 300TDI Sill - O/S (Box Section?)

    My O/S sill has caught the dreaded rot. It's a jap import, so in general it's not a rot-box, but it looks like a hole started in the bottom of the sill, and it's caused dampness and rot to take hold in the floor at the top of the sill :( Has anyone got any sills knocking about, going cheap...
  14. tombardier

    New Disco, and a hesitation problem at higher RPM and under high load

    I've just swapped my old shed of a 90 for a tidy Jap import 300TDI auto Disco, so I'll be hanging around in here a bit more :) Got a couple of little problems to iron out, but I'll just list the one in this thread. It's basically most prominent when I'm flooring the pedal up steepish hills...
  15. tombardier

    More Various

    Hi, In addition to the lot I said about earlier today, I have: YRM 90/110/Defender/Series O/S Seat box end panel - £10 - as per - Land Rover Defender & Series 2 & 3 Seatbox End o/s - YRM Metal Solutions Series 3 2.25 petrol - used distributor, coil pack and brand new thermostat - free to...
  16. tombardier

    200 TDI Engine + Conversion Bits + Assorted

    I've swapped my 90 for a 300TDI Disco now, and so I'm selling the 200 TDI engine and associated bits I had lined up to go in the 90 as well as a couple of other odd bits. Engine is on the bay here: 200 TDI Discovery Engine Complete - Good. 90/110 Conversion Parts Available Too | eBay Downpipe...
  17. tombardier

    4x Deestone 7.50 On Traditional Steel Rims

    Hi, I've just swapped my 90 for a disco, and I won't be able to use these tyres any more without lifting my suspension, so they're up for sale here! they're in reasonable condition, with a little bit of sidewall perishment happening.. I would say there's over 10mm grip on one pair and 8mm...
  18. tombardier

    1988 Land Rover 90 2.5NA

    As per subject, I've just put my 90 up for sale. A solid workhorse, rough around the edges :) 1988 LAND ROVER 90 2.5NA 12J - Not Defender | eBay I'm basically looking to sell in order to fund a TDI or V8+LPG Disco or Rangey :)
  19. tombardier

    Grinding in reverse and not sounding to good on overrun either

    As subject really. I haven't had a chance to get underneath yet but so far my plan of action will be to give the props a quick yank then lift a wheel on both axles (one at a time, diff locked) and try and reproduced the noise by manually turning wheels in and out of gear and in and out of...
  20. tombardier

    Fuel Tank - Plastic Pipe - Where does it go?

    Greetings, I put my fuel tank back in today, after the 3 months that it's taken me to replace the boot floor and do the front inner wings. Anyway, there's a plastic pipe and I can't remember/find where it's supposed to be connected. I've had a look at Microcat, and I believe that it's 'Pipe -...
Back
Top