Search results

Thanks I'll have a go at the driving into a bend and see what happens, the garage told me both rear wheel bearings would be changed, according to them it would be 6 hours labour charge! and the bearings would cost £69.28 each + vat.

Hi, Just had my Freelander 2 in for its service at an indy garage, and it has started to whine from the back, was not too sure if it wasn't road noise, so asked the garage to check it out. The say its either the rear wheel bearings, as they say that they can feel a little play/drag in them. Or...

Hi, My 2007 FL 2 has just started making a noise, just had it in for a service at an Indy garage and asked them to check it out. They say it could be either rear wheel bearings or the Diff. Does anybody know of anyway I could do a test to find out if rear wheel bearings or Diff making the noise

Hi, Thanks for the reply, I have since found out ( not long ago) it has a hex screw on the top which you undo and this drains it out at the bottom. But I have bought a new one and going to replace it today, better safe than sorry. Thanks again for the replies Chris

Hi, Hopefully a quick question, I have a freelander 2, can anybody tell me how to drain the water from the diesel fuel filter??

Hi Rhodie, Thanks for that I'll have a go at that hopefully tomorrow, but its quite a job on the freelander 2 to get to the alternator connectors, quite a bit of stripping down, I'll let you know if it works. Thanks

HI, Just done some more voltage checks at the battery. Used the car today as I had ordered new tyres and had to get them fitted, the car worked fine just battery warning light on and therefore no heated seats or heated front screan working, but engine not hunting at tickover ( so thats an...

Hi Vissie, Not sure if light was on when I checked the voltage I'm pretty sure it was though, but I will recheck. No its not a start stop one, and i do think you are correct with the lin bus wire. Cheers

HI, I've got a 2007 FL 2 HSE which has just developed a problem and would like to know if anybody else has had it and if its got a known fix. The Battery warning light is coming on and staying on. I have tested the voltage at the battery and with the engine running it is reaching approx 14v, so...

Hi Northern Irelander, sorry for late reply, been a bit busy! Sorry didn't take any photos, I was in too much of a rush getting it done for the MOT which I had booked, but the good news is it passed :):):) Also sounds a good idea Dann to remove them annually, clean and regrease. Trouble is its...

Hi All, Just had my first 3 amigos nightmare. To cut a long story down could not remove the drivers side ABS sensor (duff one) completely siezed up. After days of soaking in WD 40 and buying special anti sieze oil and hours of pulling, prizing and generally bashing it, finally broke the...

Hippo, Got mine from China and it werks:) :) :) . Not sure if its does everyfink it should, as I not got owt wrong with my TD4. But it does speak to the car using the freebee software from the tinternet. I'm still on the lookout for better software at the mo. By the way my cam sensor was...

Sorry for delay, not been on the puter for a bit. I got mine from flea bay. Just looked for the cheapest. I paid £13.99 for postage, and won it with a 0>01 bid so got it for £14. I've just looked on flea bay and one is going for £11 postage and £1 bid. Mine was from a seller tangxiaorui2000...

Just to let you know, I got my scanner from Hong kong. Tried it on my TD4 X reg (2000). It works:) :) :) . Now trying to get some better software

Not sure when I will get round to doing the next one. But soon as I've done it I'll stick some photos on.

Thats the answer I was hopeing for as I just wanted confirmation that the new pump I have just fitted is working correctly!!!

I've fixed mine using stainless steel bike brake lines. £1 summat from halfords. Measure length you need from broken bits you'ver taken off. need to file or grind down the nipple to fit in one end. Then I simply make a mark (using a pen ) on the cable where the other nipple should go. fit all...

Mine takes no longer than any other car, or at least I haven't noticed it taking any longer

Let us know if you find owt. Still waiting for my reader from Hong Kong. Not even sure it will work on my car. As its a TD4 year 2000. But it only cost £14 with postage, so worth a gamble.

TD4&abit did you find any good software for the ELM???