Search results

Hi guys hope someone can help me, my 2.25 petrol has a plug with thread on the left side of the engine behind the welch plugs (freeze plugs?) I assume it is for the heater, no heater fitted. The one on mine is rusted through so I had to break it in pieces to remove it, it is about 28 mm big, can...

Hi need advice on a 2.25 petrol, REMOVED THE FRONT PROPSHAFT, went for a spin around the block, when engaging 4 low the transfercase starts to wind up, when the clutch is engaged the back wheels lock up, the lever shift back normally to 2wd to unlock the wheels. do someone know what can cause this?

Need advice please, stripped my Landy a few years ago and can't remember what pipes go where, mine is a 1973 2.25 Sw, on the manifold is a pipe that connects to the servo, on the carb there's a 12 mm nipple, but the inside diameter is about 5mm, it is facing to the firewall at a 45 degree angle...

Hi all, I rebuild my 2.25 Landy engine, new pistons bored 40 oversize, new bigends and main bearings. When turned by hand it turns freely, when I turn with the starter without sparkplugs there is a hard knocking sound, any advice? Sent from my BlackBerry 9900 using Tapatalk

I am busy rebuilding a Series 3 and I have a diesel filter system with the pump on top of the filters available, it is from a Nissan diesel pick up, can one use this system on the 2.25 petrol? I am not keen on the little inline filters. Thanks!

First time I post in the Defender section, hope you can help, I am looking for the name of the Green the Pumas is available with, not the dark an not the light green, its a dull type of colour, almost millatary?! sorry difficult to explain in works, want to spray my Series in that colour!

I tried searching but cant find an answer, I know 235' fits on wolf rims, but I have never seen 7.50 on them, is it possible or are the rims to wide?

Hi all, hope someone can help, my Series 3' gearbox locks up when coming out of reverse, forward gears can't be selected, only reverse, it is not the usual lock up when a slip of the clutch cures it, selecting reverse a few times unlocks it again, any advice?

Hi all, hope someone can help me, my series 3' gearbox locks up solid when comming out of reverse, the forward gears can not be selected only reverse, it is not the usual thing of slipping the clutch a bit to select a gear, it feel like something is blocking it, engaging reverse a few times...

Hi everyone,my Series 3 have a problem when selecting 2nd gear it selects it fine but feel as if it goes past 2nd and then crunches,almost as if it catches on another gear,is there a stopper of some kind that I can check?have reconned my series 2 gearbox so know a little,but hope someone have a...

Hey all, tried to search,but searcing from my phone, can't get results!I want to repair 2 dents in my front fender,have 2k paint mixed to spray with,what tips do you have prepping the fender and spraying it?thanks in advance!

Hope someone can help,my Series 3 2.25 petrol have a new battery reconed starter and alternator,but when I start it,the starter barely turns over,luckily it starts quickly,any advice?thanks

Hope you can help,my Landy got one freewheel hub and one flange on the axel,at the mo I keep the hub locked but the whine make me crazy,is it possibly to unlock the hub,to let it freewheel,I know some jap pick ups unlock only one wheel,thats what gave me the idea!I cannot get a replacemant hub...

Hi all,i am new to the forum,but been reading it every day,i am planning on fitting a Detroit locker on my swb(salisbury),does any one have advice or experience with this setup?any help apreciated!