Search results

OK. Got the nuts. Same part No. as Sieraferry mentioned. VYH500020, fine pitch. Went straight on without resistance. I visited quite a few sites and saw quite a bit of advice, most of which was "you can't do it yourself" or "you have to take the downpipe off". I didn't find this video until a...

Thanks for the link @sierrafery I didn't know that site. I just ordered a couple from Brookwell this morning. Thanks for the advice @Shippers

Thanks for all the advice guys. The thread on the bottom of the lever doesn't seem to be standard, so I'm guessing both are a non-standard pitch i.e. don't take an off-the-shelf M8 from the hardware store. I contacted my old Landy supplies place in England and they confirmed it was M8 but no...

Nope. I don't have one.

I recently had my XYZ switch reconditioned, but somewhere in the 4 months since I removed it, I've lost the nut which goes on the selector shaft. I've tried the nut from the bottom of the lever but it doesn't seem the be the same thread. Also tried every other 13mm nut I can find but none seems...

Hi folks. Pretty sure I've got a leak in one suspension hose. I had the Disco pumped up with repair valves for 4 months and it didn't lose air from either bag. As you can see in the diagram from one vendor, which looks the same as the rest, there doesn't appear to be any threaded terminals on...

I don't have that option. I get the choice of LR or Jag, then Discovery and year. Nope, because I've had if done now. That's kind of the problem I suppose. The Foxwell found no faults at all, and like yours displays that the ride height is calibrated already within expected tolerances, so I...

Yeah, thanks Andy. I can get to the menu via the ABS, but once I reach the option to cancel or continue with calibration the box freezes, so no way to do either.

Foxwell support now saying that the device doesn't support special Functions on my vehicle. Looks like a refund job.

Yep, the machine is working fine. D/led the latest available version when it arrived. It's just not displaying anything in the AT section. none of the special functions are listed as in the image I posted in this thread. All the other modes are fine, e.g. clearing codes, ECU data. I sent Foxwell...

For some reason the Foxwell is only displaying "Reset Adaptions" in the AT menu. Luckily the garage had a Snap-On box which did everything perfectly. I'll contact Foxwell to see if they can explain where the AT menu has gone and report back.

Well, got the Foxwell NT530 but it didn't give me the option to calibrate the air suspension. No idea why. Once in the AT menu there was an option to check or reset codes. Can't remember because it was getting late at the garage and I didn't want to try anyone's patience. Whatever, there was no...

Thanks for the info. Thanks to all for informative and concise contributions.

Can you confirm that the Nanocom or other device performs to my requirements Griff?

Nice one Andy. Thanks for the pics. Griff. Thanks for the bad? news. I'm just wondering is Foxwell have circumnavigated that problem in their S/W. Better ask I guess, until someone says they can or can't modify SLS with this specific device. I really hope it's possible as the price is about 1/3...

OK, I mailed Foxwell yesterday: Hi. I'm having a real problem finding out which of your units will allow me to /calibrate/set the rear air suspension self leveling system on my Land Rover Discovery Mk2 2004 Landmark model. I was originally told on a Land Rover forum that the NT510 would do it...

Above and beyond mate. Really grateful.

Thanks for that Andy. I wish mine looked so neat :( Had my airbags inflated on the schrader adaptors for the last 4 months so I guess they're still solid. Really don't fancy driving it more than a few km on the crap roads of rural Galicia. If one of the adapters failed I'd be stuffed in the...

Thanks for your kind assistance. I tried to get this info a while back. The chat option on their site never works. Emailed them thus Hi there. Just read your ad https://www.cardiagtool.co.uk/foxwell-nt510-multi-system-scanner.html and had been advised to get the 520 for my Land Rover Discovery...

Well, after many months I came back to the Disco because it's time to start carting firewood. Not a job for our Ford Focus. Tried some local bloke to make me sensor brackets. Took him a month and were utterly rubbish so eventually got a pair off ebay, which arrived this week. I did get a reply...