Search results

checked plus and voltage there but nothing out and found a pin popped out , so pushed back in . and there working again . cheers

Thanks , I will check tomorrow after work , the light is starting to go . cheers

what I should ask is what is my next things to check , I will study rave later but not great on schematic diagrams ... yes I know the switch switches the earth but then I'm guessing goes to bcu which then I'm lost what happens inside .

I'm a bit lost with all those links etc . when I bought mine it had a trailer plug on it and it's still on it and the fogs worked last MOT I haven't changed anything . So what am I looking at ? cheers

Hell on my 2004 td5 I have no rear fog lights but the switch works and the Tel tail led comes on but no power to the bulb holders in the rear bumper . As this is a bcu system can anyone tell me where to go next please ? I'm a bit lost .

I could weld a peice of Ali bar onto the housing and drill and tap that so a bit more meat potentially

it's a td5 and problem is most things go though a bcu or the ECU so not that simple and the dash guage is built in the dash board not individual clocks like a defender or a series . it's on a disco 2

Hello , I like to add a additional coolant temperature guage and sensor with the warm weather and doing quite a bit of Laning up hills and the like . My question is where is a good place to put the fitting tube for the sensor ? In the top hose before the head connection ? Thanks in advance

Thank you !

Il give a go with a power probe first , is there any connection plugs between the stalk and the fuseboard do you know ? The loom looks a right pain to get at at the rear of the dash cavity !

but there is no continuity from the multiplug from the stalk ( blue with red trace ) to a plug to the rear of the fuseboard with the plug not plugged in ruling out the fuseboard surley ?

I could feed the back of the board end of plug with the power probe .

cheers Andy I've found I got power to the switch on the multiplug and out when switched on but the fuses on the fusebox under the column has no power . Found the same colour wire as the out from the switch on the rear of the board, there is no continuity there . I'm guessing there is...

On my 2004 td5 I have lost dipped headlamps but working sidelights and main beam and flash. With the ignition on a lights switched on there is no power at either of the fuses under the steering column . studying the schematic I see in the engine fuses box , fuseable link 10 feeds the stalk...

comfort .... there quite a bit of comfort compared to driving a 200tdi defender from swindon to Manchester and back ! yes the steering lock isn't great !

I need one please

I have a lof powerspec SMF conversion in my td5 d2 also and no vibrations present at all even at motorway speeds . The clutch and the clutch plate are different to one with a dmf, the plate has a dampening hub to call it that in the centre . Not fitted the Powerslave but it's on my list to do as...

On my 2004 15p discovery 2 I'm replacing the FPR but which gasket is correct ? I have looked on the internet and I am being told that MSX100080 which has a square hole in and is for a 15p then other places say a MSX100010 is for a 15p and had a round hole in the gasket. can anyone confirm...

Think going to have to unbolt the shocks and drop down more as need a cordless drill and drill bit length under the sump . Just thought I might have wrong size or another way around this problem

M12