Search results

This is a great read I have had the same fault for over a year now drives ok so was not bothered, trued the break switch, and trued to adjust the safety natural switch but still there, will keep this post and when I have the motivation will look in to it further once again great post

This is probably one of the most common faults I’ve been driving my TD4 for almost a year now with my hill descent light on and off for flashing on the dashboard drives perfectly fine tried already known fixes to no avail you could try doing some research on this site

I have the same HDC light on after outing it in to drive changed the break switch and still there diamagnetic tells me it’s the “A circlet fault but bony know where to start to sort it out . Did try to take out the natural safety switch and clean it but still no not so I am stuck with the fail ...

I did mine on a auto keep at it try a small amount of grease it’s worth it in the end good luck

Also tried cleaning up both sides of the contacts on the neutral safety switch with electrical contact Layla and also the servo in the top of the gear change but still didn’t make any difference so it is the a circuit whatever that is would love to know if someone has experienced the same

Mine has been on all the time when I put it in drive I’ve change the brake switch taken off cleaned and rebuilt the safety neutral switch readjusted it 20 times or more but still the same put a OB tester on it and it tells me I have a fault on the a circuit showing a fault number P0705 I think...

Where is the bleeper located please

What led light go in the main dash anyone know and how many

Is this auto box ?

Thank you so much fir your reply that clears it up for me thank you

Could you also assist me I have been working on the TD4 and could a filter at the back of the engine that is like a small fuel filter that is connected to a small rubber hose but it is not connected both ends . Do you know where is meant to go / to / from?

Thank you great advice, I will look today and let you know all you have detailed are relatively easy to explore so maybe even I can do it

When I change the auto shift to ‘D’ the ‘N’ light come on at the shifter and I get F4 flashing and the HIll descent light comes on at the dashboard, if I then pull it back the shifter just slightly I get the ‘D’ on the dashboard but the hill descent light stays on but it won’t stay in D it goes...

This I a great help thank you , do you know if it is adjustable ? If it is where can I fine some information on it?

Yes sorry it’s a 2005 TD4 Freelander facelift automatic

Thank you is there some where I can get a photograph of where it is so I can see how difficult it is to get to , is it from inside the car or from underneath?

Can anyone tell me where is the Land Rover Freelander Gearbox Neutral Safety Switch / Range Position Sensor is located , as I think it has gone out of alinement .

wonder if you can help me again I have a 2005 Freelander TD 4 facelift model auto , cad the when I select drive (D) I have noticed that on the selector the (d) and the (R) light comes on ? and on the dash its showing the HDL light on as it flashes F- 4 alternately , when I drive it like this it...

wonder if you can help me again I have a 2005 Freelander TD 4 facelift model auto , when I select drive (D) I have noticed that on the selector the (D) and the (R) light comes on ? and on the dash its showing the HDL light on as it flashes F- 4 alternately , when I drive it like this it seems...

Hi Guys I wonder if you can help me again I have a 2005 Freelander TD 4 facelift model auto , cad the when I select drive (D) I have noticed that on the selector the (d) and the (R) light comes on ? and on the dash its showing the HDL light on as it flashes F- 4 alternately , when I drive it...