Search results

Morning all Just sorting out some tidying up of the defender. I’m after a couple of bits that I cannot find on the parts list or the retro ananconda document. Wondered if anyone knew the numbers they are the two rubber bumpers with a nipple on that go into the exterior bulkhead to stop the...

Morning all. Following the info here I have wired a td5 speedo into my 300tdi. I have wired all the pins in plug A with the exception of those for the alarm LED and ECU. when I plug it with ignition off the mileage display shows. Is this right ? If so what is the difference in operation of...

Hi - does anyone have a rear trim piece for a 1995 CSW 90 that goes above the back door. it’s the smaller piece in this picture. Thanks

In stripping old rear door to move stuff to new door I put the element tab that fell off the heated window somewhere safe. Now I can’t find it. Nor can I find a replacement online. anyone know where I might source one. It’s the metal tongue and pkate that gets glued to the element and the...

Hi away from my 300tdi 1994 CSW at the moment pondering a recent and quite quick oil leak. cannot share pics as not with vehicle. But I am seeing oil roughly as ringed. I have degreased the engine and the leak is landing on the ground just behind front axle on rhs if looking at vehicle from...

300tdi CSW 90 I recently removed all my rear lights to paint back of defender. Before removing all lights were working. replaced lights none on RHS working did usual checks and realised power was getting there so was earth issue. two earths in rear corner. The one from the loom that is...

Hi got these but can't find instructions. What order do the washers go? I assume bolt, washer, door, body, hinge? thanks

Afternoon all. Bought a new rear door from paint man panels. Looks really good. But it has a bracket below the lock mine doesn’t have. any idea what it is for? I have asked them but weekend etc

Hi all, last Autumn I lined the inside of my roof with sound deadening on a roll. The type that is aluminium foil (thickish) on one side and some sort of bitumen on the other. This has stayed up fine. However, where I taped over the seams with what I thought was sticky aluminium tape in the...

Hi I am after a rear roof trim as above - its the bit in a County that covers the back or the rear washer and the cables etc.... shaped like this picture of a leather cover for it (Only picture I could find)

Before I start cable checking I have just replaced my binnacle with a flat dog metal one and the housing too. I have also finally removed the green bulb hoods from the gauges. Everything worked fine before. On refitting today and turning key on the fuel and temp gauges max out. Sounds like an...

Morning apart from at the gearbox, bulkhead and speedo is there anywhere else the speedo cable is fixed - e.g. to keep it following a particular path etc..... Just trying to work out if I can do the job by just removing plate under cubby, or if I need to go somewhere where I can get underneath...

So playing catch up on service history gaps. How many rubber belts does a 300tdi have. just a cambelt. Or a Cambelt and an auxiliary belt. Thanks.

Morning, which is the correct workshop manual for this vehicle 185520519X Land Rover Defender 1993-1995 Petrol and Diesel Workshop Manual Including 300Tdi Engine, Manual Gearbox and Transfer Box Overhaul Manual (Land Rover Workshop Manuals) or 1855205041 Land Rover Defender 300Tdi 90. 110 ...

Hi hope you are all good .... so I have a tearing trousers issue, which isn't so bad for me, but took a guest in the land the other week and she tore her leggings - which was a little embarrassing. Its not on the door catches, but seems to be on the seat runners as shorter passengers slide out...

Hi, anyone heard from Flatdog recently? I placed an order back in early September and they contacted me to check that I had ordered the correct item (good service) then I've heard nothing since. Emails have gone unanswered. Calls ring out to answerphone - which is full. I just wondered if...

Currently lining inside of defender with aluminium banked sound deadening insulation. So various bits taken apart. Reverse lights and brake lights weren’t working. Read the circuit diagrams and realised both on same fuse. replaced fuse and still no reversing light But realised my hand was...

Morning all. asked elsewhere and getting divided opinions. Is this lifted or not. 300tdi 90 CSW Current springs look black under the rust Tyres are 265/75/16 Distance from centre hub to bottom of the metal wheel arch cut out Is 25” front and back

Hi overtime I’ve collected a number of items that require direct connection to the battery eg Boomslang loom, Red Bison light bar loom and CTek charger socket. These all have inline fuses as standard. All are current connected to the battery clamps. I am thinking I should improve this by...

Had a bit of a search fest but coming up blank. But does anyone know of a company that do padded cushions (ideally in black vinyl) that fit on top of wheel arch? For a 90 also ideally removable.