Search results

Hi, I'm 3/4 of the way through my rebuild 2a 88 with a 3.5V8 and I was wondering if anybody had fitted a TD5 engine into a series, as I have a rotten D2 with a good engine and I keep looking at it and wondering if it would fit and how much work it be, and if anybody has already done this? Cheers

Anybody going?

Hi, I'm posting this for a friend who does not get on with computers. He has a 06 l322 4.2 suspension drops overnight if the battery is connected – with the battery disconnected or flat it stays up. Any ideas would be very helpful, cheers.

Hi the time has come to fabricate sill, rock, tree guards I was going to use 75x50x4mm box with some sort of tubing to finish these are not for steeps but to protect the bottom of the doors and lower body work any suggestions or pictures would be very helpful Cheers.

Hi trying to help out a neighbour out with his Rover 25 DOHC he's put a new timing belt on and it won't start is it possible to get the timing 180 deg's out any help would be great cheers.

I have several sets of standard door top pains just need cleaning, free, no charge I really don't want to bin them but they don't fit my doors so please somebody come and take them away [map]Launceston[map]

Hi I have the alloy twin sliding glass door tops and need to replace the glazing channels does anybody have part numbers or a supplier who does stock them Cheers.

Hi I have the alloy twin sliding glass door tops and need to replace the glazing channels does anybody have part numbers or a supplier who does stock them Cheers.

Today started fitting my rear door and using a defender rear door so thought i may as well fit the third hinge but does this look right any help would be great before I start drilling holes into new parts

It's time to replace my lower doors where's the best place to buy them from I Need 2A doors with the cut outs for the anti-burst lock and any to avoid cheers for your help.

It's time to get the head lining done got some nice carpet, got the roof off so it's upside down so no glue in hair or fighting to hold it up all I need now is the glue was thinking of using Evo-stik impact adhesive what have you used or know what work best cheers.

Just thought I would show the set caliper set up the large ones on the left are for the fiddle brakes Hi need some help I’m trying to use a P38 ABS pump to power my fiddle brakes on my off roader I have installed a second pair of calipers bought a pump & a pair of solenoids for the rear axle I...

Hi i'm about to fit my hard top and was thinking about using neoprene instead of genuine foam ones anybody know the sizes or any experience of different materials that have worked Cheers

Hi I know there is a thread about this but I can't find it. Trying to use the abs pump to power fiddle brakes trying to find out what each pin in the multi-plug on the abs pump do and help would be great Cheers

Hi my project is moving on and i'm about to change the rear axle I have a R reg Disco 1 rear axle with anti-roll bar mounts the question is which is the correct bearings & seals for this axle as it seems that there are 2 different types any help would be great thank you.

looking to change my front calipers as someone has fitted twin pipe ones on my R reg Disco and I want to fit single pipe ones. My Question is are all coil sprung calipers bolt patterns the same I Know Metric ans Imperial are different bolt size but not sure about bolt pattern would 90/110 ones fit.

trying to report change of engine but only got 6 numbers and a letter is this correct is it possible that the head is covering some of the details or is this correct.

Hi after fitting a disc hand brake but with a hydraulic lock for when being left overnight, the question is will the front out-put flange fit instead of the large hand brake one any suggestion would be great before i start pulling gearboxes apart for no reason.

Hi just signed up so here's a bit about my land Rovers. I have a 2000 Td5 Disco awaiting a 1/4 chassis and a project 1971 88 V8 on a Designer Galv Chassis with coils and Arb's back and front the bulkhead & front panel have also been hot dipped galv so fingers crossed no more rust still evolving...