Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. T

    Disco 2 M6 Broken down...

    Sat at side of M6 waiting for recovery. Lad borrowed my Disco2 TD5 to collect some parts from LR Parts, and called, saying its broken down, smoking, and no power.... Came up and swapped cars, so Im waiting at side of motorway... No faults showing on Nanocom. Smokes white/blue smoke on...
  2. T

    Defender 90 TD5 Non start....

    Got an issue with the lads 90 TD5. No EGR, no cat.... Within the last few weeks he's had starting issues, where its taken ages to get the engine to fire, but once going its been fine. Now its a pain to start, and is cutting out whilst driving. We checked with nannocom and no faults stored...
  3. T

    Disco 1 Grumps Barn

    Does anyone else follow "Grumps Barn" on Youtube. He's a guy from Scotland, who is currently making a Disco 1, into a trike.
  4. T

    Disco 3 (LR3) Disco 3 Super low prices

    I had a chat to a mate of mine today, about the Disco 3's. The prices seem so low its actually worth buying two to make one good one... I have the room to buy several cheap ones, so am considering it. However, some of the Disco 3 issues far outway the time and money you have to put in to keep an...
  5. T

    Disco 2 Rear shocks for a Air Suspension conversion.

    Just looking at replacement rear shocks for my Disco2 TD5 2003.. Its had an air to coils conversion, done at John Craddocks, by the PO. Are the shocks the same, or will I need to still buy shocks to suit an air bag vehicle ?
  6. T

    Disco 2 Oil pressure connector

    Removing the gearbox, Ive managed to break one of the wires off the yellow oil pressure connector. Are these connectors available as new ?
  7. T

    Disco 2 Clutch spline.... which grease ?

    Just cleaned up the spline shaft on the replacement gearbox Im fitting... What grease do you use on the shaft ? I googled it and it gives me info on some SACH's high performance goop for 12 quid a throw... not likely.
  8. T

    TD5 Defender 1999 Fuel Filler Hose

    Looking for a part number for a fuel filler hose for my lads TD5 Defender. I bought a WLH500100 but it doesnt fit the tank, too big, or the filler spout, too small. Anyone have an idea what the correct part number is ? Im fitting the tank back tomorrow, following replacing the fuel pump. The...
  9. T

    Defender 90 TD5 Wouldnt start after fuel filter change

    My lads just bought a Defender 90, and Ive been putting an ever increasing list of bodges from the previous owner(s) right on it. We replaced the aux belt, tensioner and roller bearings as it sounded like a bag of spanners. Fired it up, and it sounded lovely. Next item in the big box of parts...
  10. T

    Disco 2 LT230 rear seal

    Ordered a rear output seal for my leaking LT230 transfer box, on the Disco 2, TD5. Arrived this morning but Im not sure I have the correct part... Ordered a STC3433 off R and C 4x4 off thE bay.... This is what was listed in the kit... and this is what arrived... Which one is...
  11. T

    Disco 2 New front springs

    My disco is sagging on one side, by about 2 inches at the front. It always has, and I knew it when I bought it. Looking to replace the front springs, shocks, steering damper, Delphi ball joints and anything else that seems worn. I dont want to lift the vehicle in any way, so can anyone...
  12. T

    Disco 2 Non-Return valve replace.

    So, my parts arrived this morning, so I decided I had nothing better to do this evening. Replaced the air valve, and the fuel non return valve, plus the fuel filter. Seems to have stopped the failing to start issues, but I will wait until the morning before I 100% confirm its resolved the...
  13. T

    Disco 2 Driver Demand tolerances

    On my quest to perfect my 2003 TD5, Ive checked my driver demand values, with a Nanocom, on a trip out. I had previously had a "Driver Demand" fault, which cut off the throttle whilst driving along. Ignition on/off reset the BCU. I dont know how to do a live recording of the engine parameters...
  14. T

    Disco 2 Crossmember bolts !!

    Any advice for removing the cross member bolts... Need to replace these bolts, as they are just rusted solid. I have used penetrating oil, and heat but they still wont budge. Two have snapped off, after using a reverse spiral extractor. Will neet to remove the captive nuts after as well, as I...
  15. T

    Disco 2 New tyres.... lots of noise....

    Had a full set of Grabber AT3's fitted last week. Previously the rear two were Grabbers, and the fronts were an unknown make. But, jesus, the noise levels have rocketed in the cab.. Sounds like bad bearings now. Anyone else fitted AT3 tyres and experienced the same...
  16. T

    Disco 2 Poor performance, Low Ambient fault.

    Hi, I have the following faults logged on my Disco 2 facelift 15p engine (manual gearbox). I take it the sensor in the air box needs replacing. Im only getting a reading of 2.93kpa on logging. NANOCOM - TD5ENG.APP - TD5 ENGINE fault file (2,8) AMBIENT PRESSURE CIRCUIT, (LOGGED LOW). --- (4,3)...
  17. T

    Disco 2 Exhaust stud and bolt size

    I have a TD5 Disco facelift. Im going to be replacing the exhaust with a decat pipe, and have looked at various threads that suggest there's a good possibility a studs going to be sheered. I've decided to replace all of the studs and nuts for new copper coated ones. Can anyone tell me the...
  18. T

    Disco 2 Front axle breather pipe

    Looking for a part number for the front zxle breather pipe on a TD5 2003 Facelift, plus the push fit connector to connect to the axle itself... Any one have an exploded parts diagram ? Thanks... :)
  19. T

    Disco 2 Replacement seat covers

    I can see those loose fit seat covers available everywhere, but is there anyone still making custom replacement self fit covers ?
  20. T

    Discovery Virgin

    Hello everyone. My name is Rich, and I live in the lovely Staffordshire countryside. Im buying a Discovery 2 TD5 today from a colleague at work, as Ive always wanted one. Im sure this forum is going to be very helpful, as I love tinkering with vehicles. I look forward to chatting with you...
Back
Top