Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. T

    Roll Bar

    Would there be any noticeable benefit in fitting a rear axle roll bar to a 110 commercial van. The brackets are on the chassis and axle. I assume that only 5 door station wagons were fitted with one as standard.
  2. T

    110

    I have just about finished the rebuild on my 110 TD. New chassis, brakes, engine rebuild, new body panels…etc,etc,etc. The project grew like Topsy, the usual excuse was….well I’ve got this far so I might as well!!!! The only issue I have is that the brake pedal is a bit long…..not overly so, but...
  3. T

    Ride Height

    I have fitted new Road springs to my 1989 110 commercial. The drivers side is 35mm higher than the passenger side. I know that the springs are different and that the drivers side is supposed to be higher, but is 35mm excessive? When I sit in it the suspension drops by around 15mm. Perhaps the...
  4. T

    Bonnet Misalignment

    I am trying to fit the bonnet on my 1989 110. The hooks that the hinges fit into are not evenly disposed around the center line of the vehicle. The bulkhead is original and as the hooks are welded to it, they could not have moved. The offset is around 8mm towards the nearside. I wonder if...
  5. T

    Free Wheels and Tyres

    4 x 90 wheels and tyres.....tyres got good tread but some age cracking. Hold air. 4 x 110 wheels and tyres...tyres shot but hold air. Free free free but you have to take all eight.
  6. T

    Spare wheel mount.

    Wanted. What ever it is to mount a spare wheel on a Defender bonnet.
  7. T

    Wheel Nuts

    I need some M16x1.5 wheel nuts for my trailor. Indespension want a ridiculous price. I thought that the ones on my 110 would fit but they are 5/8" UNF. Did the nuts change to metric on later Defender/Discos?
  8. T

    Windscreen Fitting

    I purchased a rubber windscreen seal from Britpart. The local windscreen fitter, when asked if he would fit the screen for me, immediately asked if I had a LR seal or an aftermarket one.....saying that he has had such a bad experience with the aftermarket ones that he will not fit them as they...
  9. T

    Evoque

    Hello All, I think that one of the hydraulic lifters in my wifes diesel Evoque is faulty. What is involved in replacing them.
  10. T

    CAV injectors

    What's best...... Buy new injectors. Send old ones for recon. Buy a test pump from ebay and recon yourself and have the pump for future testing.
  11. T

    Are Range Rovers / Discoveries any good.

    I keep seeing ads for 10/15 year old RRs and Discos. They seem incredibly cheap for a lot of car. They must be cheap for a reason....are they that bad. I am thinking of taking one on as a project.......I have good workshop facilities and, for the right car, would even lift the body off. What is...
  12. T

    Turbo / FIP woes.

    I am not sure if my turbo is good or bad....so have sent it away to get checked However............... When removing it I found diesel fuel in the boost actuator, which presumably came from the injection pump. Is there a seal or something that can be replaced. Also......... I want to check...
  13. T

    Turbo

    Wanted...turbo for a 19J Now sorted......
  14. T

    Lift Pump

    I have just ordered a new lift pump for my 19J engine. The kit comes with a spacer that fits between the pump and the block. The manual says that if you have one fit it and if you haven't then dont. I have not got one fitted, but how do I know if I should have?
  15. T

    Wheels and Tyres

    I have some 90 and 110 wheels and tyres for sale........ Two Kuhmo Road Venture MT 205/80/R16, 8mm tread. £35 each Two Technic Tracker 11 215/65 R16, 8mmtread............. £35 each Wheels are standard LR steel and the tyres look ok. Four 110 standard LR steel with non roadworthy tyres...
  16. T

    Progress Todate

    This is my engine progress todate... Reground crank, Rebore, New Valves and guides and followers, Hotspots,Timing Belt etc, etc, etc. I took the oil pump drive gear assembly to pieces as I was told the perished 'O' rings will cause low oil pressure. Well the inner one was missing and the outer...
  17. T

    19J Head Gasket, Which Way Is Up?

    My engine is coming together quite well. I am now about to fit the cylinder head. The manual states that the head gasket should be fitted with the embossed ''Diesel" uppermost. Well my new gasket does not have "diesel" stamped on it and the old gasket, which has, was fitted with the diesel...
  18. T

    Gasket Location

    I am at a loss to find where the 'triangular joint washer' item number 23 goes on my 19J. I thought that it went on the block behind the timing belt tensioner....but in no position does all 3 holes line up with anything. Could it be for a petrol engine with a timing chain and hydraulic...
  19. T

    Unrecognised Part

    Could someone please tell me what this is. I have just started to put my engine together....after taking it apart 18 months ago......how the memory fades!!! It was in the box with the timing belt pulleys, but as it is black and oily it may not be from that area. It is about 30mm long x 8mm...
  20. T

    Brake Pedal Return Springs

    Could someone please tell me where/how the two brake pedal return springs anchor to the bulkhead.
Back
Top