Search results

Hi I have just changed my p38 dse for a 2008 freelander 2 when I turn ignition on I have a alarm sound in the car I think it could be park aid system there is a tow bar fitted with car going in reverse pdc dose not work any help please cheers Pete

Hi I have just changed my p38 dse for a 2008 freelander se all runs fine but I have a alarm sound for about 5seconds in side car when I turn ignition on .i think pdc aid as it is not working and it has a towbar fitted any help please cheer Pete

Hi my p38 started blowing horns when i was shopping .i started the car up with horn blowing then they stopped i got home and stopped car and off they went again so i removed relay and the are off i dont think it is the alarm any help please

Hi i have a 1996 dse i have jacked up one front wheel with autobox in N and handbrake on the wheel spins free with one finger If this is not right would it stop my auto box locking in 4th gear .I have no faults showing Thanks Pete

Hi is there someone that can tell me where the spider unit hides on my p38 .the testbook says wire fault or spider unit cheers pete

hi is there any measurements to line drive shafts up after fitting four new joints . i are doing a referb axle to put on cheers Pete

hi i have just changed my wheels from 16 to 18 this puts my speedo readings out. can i change the abs ecu off the r/r with the 18 inch wheels to give the right readings . my r/r has no TC but the other has will this all work cheers Pete

Hi Clarky 130 I have p38 dse 1996 the radio has stopped working can you please give me the link to the info on your wire diagram i have one pink 10 pin plug and one grey 8pin I have got the plugs and i can solder ok thankyou cheers Pete

Hi I have fuel leaking from the injector with wires on it I have fitted all new fuel pipes but still leaks The motor runs ok and stars fine .would disel leak from where wires fit into injector ? cheers Pete

Hi just to say i put the psi power box on my 1996 B M W dse r/rover 2days ago?and wow what a little sports job it is now .Fuel mpg went up and the auto box dont change gear so much .This is a must for this motor regards Pete

Hi to you all .Can sombody tell me if the left hand body shell on p38 dse has the cut out in the floor for gear change in a different position to the right hand drive thanks.I have only joined this site 1 week ago is very good for info thanks Pete

Hi to all out there I have the hot start relay fitted on my motor Can i fit the 15 second timed relay on same pin numbers The relay is off a 1986 classic.I think the hot start relay on my range rover has done my fuel 17.5 mpg I had the normal relay fitted for a week was gettin 23.9mph cheers...

Hi to all out there ,im pete from bridgnorth I have just had A range rover p38 dse. Can some one tell me if the relay for bad hot starting has the same wiring config for the 15 second relay off 1986 range rover as i have the normal one fitted.Can i put the timed one on same as normal one cheers pete