Search results

Right some bastard run into the rear side of my discovery td5 bent the exhaust caved in the side panel it an old work horse but I have got a flashing symbol on the dash the door wont unlock anyone know what this means

We I just seen Richard hammond give a tour of the off road super computer that's what they are calling it I calling it a box of ****ing tricks. The 110 looks very similar to my wifes freelander 2. I will nail my flag to the mast. That's not a defender try floating that down a river inside full...

Hi guy dont know what to do with this chassis advice if yous can. Thanks andy the video will kinda explain

I hi i must be missing something where do yous all get the parts nos from surely you dont know them off by heart. What's the book called it would make it easier ordering parts Cheers andy

I was fitting a new front uj and I cant figure what's happening 2 caps and clips on no prob the fitting the 3rd cap and clip ok but the other end needs pushed down a bit to fit the clip but when I do this with a press I am pushing the end of the caps out ie breaking them the only thing I can...

Hi does anyone know or where I can find the part no for the shims for the input gear. I dont want to buy an Ashcroft kit I will just buy the one close enough from landrover. Cheers andy

Right I just mating the 200tdi to the gear box fitting a new paper gasket and new crank seal tried a oem one kinked it. I am thinking those rubber looking ones err2532. Anyone used these as I int want to take it back out when it's in. The orange rubber one looks ideal if it seals . Anyone good...

Are they really that bad?? I am thinking they would not make them .someones obviously buying them. I have only fitted 1 bad clutch in my time valeo it turned out to have a warped friction plate. So these britpart ones why are they bad and how do they fail ? Thanks

I have read that the lt 77 pre 200tdi is slightly higher geared than the 200 tdi lt77 so my question is that being the fact is there any point fitting a 1.2 lt230? To replace the 1.4 or have I got this wrong I am starting to doubt myself. Any advice ?? Thanks andy

Where is the cheapest place to get spring holders , outriggers ect. The prices vary £30 for a spring holder and £50 for a radius arm bracket. Where do the sellers get them from ??

There is a "defender jam" going on in scotland in a place called largs it on the 31 aug. Has anyone ever been? Is it a big well known thing or is it just a few guys in the middle of a park? Any advise welcome

Has anyone used this make before there the cheapest ones they might be ok I don t know another thing coated or non ?? I know 15 thou coated 25 thou no coated but what's best ??

I have striped the box but the shaft does not look that worn but the gear in the lt230 looks completely worn. I think someone has put a new shaft in sometime in the past but not touched the transfer box. I have no experience with these boxes someone can some one have a look at the shaft does...

I have just started lt77 strip as worn shaft the usuall. I was apprehensive as the special tools ect but it all went easy no problems I was shocked I was expecting problems. That's removing the collar and 5 gear wheel. I used this puller cost about £25 from tool zone This worked well no need...

Whre is the best place to buy these. The prices I have seen are very expensive. £200 am I better trying to find them second hand somewhere. I have not taken them off I just really need the drivers side rear corner under the window but £80 FOR THAT.i going to be going to that defender jam in...

Well if that's it it not for me. It's a discovery 5 chopped. That a pc defender type loads of electronic this and that good for the school run. I think that will be a fail yes I see it can go round corners fast great. That not what a defender should be in my opition it should be a road going...

Well I have now confirmed that my gearbox lt77 suffex f needs a rebuilt main shaft worn.i been fixing car for about 30 years but never have I rebuilt a gbox. I would like some recommendations as to what puller to get to pull off the collar and best place to source the main shaft. Many thanks

Hi have just taken the plate of the back of the transfer box and oil was starting to pour out so I just stuck it right back on . I am assuming this means that the box has been reconditioned and it has the modified gear in the transfer box. I not driven the car it's getting a 200 tdi which I had...

This is just my opinion but I and I ain't a land rover expert think they ****ed the new defender. The company is like social justice warriors eco this electric than. If only could they not make a live axel defender no/ min electronics pull 3.5 ton big diesel engine tuns of torque good price they...

I am just going to start this conversion. I have one question if I fit a defender 200 tdi exhaust manifold to a discovery 200 tdi will there be any problems. I am thinking this would be the best option so I can fit a defender 200 tdi exhaust or is there something I am missing. I found this...