Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Remington rolling block

    300TDI starting problem,,,, kinda

    Hello All. I have a problem with my 96 300TDI... Its been running fine for months but 2 days ago I came to start her up and I had to crank the motor for a lot longer than normal. When she fired up everything was normal, I expected clouds of smoke from over fuelling but no just its usual morning...
  2. Remington rolling block

    Defender brake prob

    Hello All, I got a wee prob with my defender 300tdi a 96 vintage none abs, I just cant bleed them, all pistons are free all nipples clear plus a new master cylinder,,,, no matter which calliper I I try I get about 3 to 4 pumps full of air then the fluid flow stops, tried bleed tube and...
  3. Remington rolling block

    Drag link length

    Hi All, Well starting my front end rebuild ( after being stingered ) Any of you lads know the length for the primary setting of the drag link ball pins. Cheers Tom
  4. Remington rolling block

    Adrian Flux

    Hello. Im posting this as I suffer from Tinnitus and have difficulty using the phone. First I am an Adrian Flux customer, with a 96 defender 90 300tdi, Comp cover At 1,00am approx. on Sunday morning my defender was stolen off my driveway. My wife heard it start and immediately called the...
  5. Remington rolling block

    Defender wiper problem

    Hi All, Got problems with me o'l fender again. the nice chap at the MOT station didn't like my wipers ( to be fair neither did I ) so new wheel housings were fitted plus a new drive cable, all seemed to got and got my MOT however if you run the wiper for more than 20 seconds the wheels jump the...
  6. Remington rolling block

    Defender 90 swivel ball seals

    Hi All. I need to change the above seals, the S/Bs are fine its just the seals now what im wondering is can pull the whole assembly with 1/2 shaft complete or do I have to strip the bloody lot down,,,, Cheers
  7. Remington rolling block

    Defender300tdi brakes very heavy

    Hello All, Got a bit of a problem with me old girl, ive fitted new discs and callipers all round, bleed it all clear. haven't touched the servo or vac pump,,, The brakes work okish but they feel very heavy like the servo aint working. Now ive checked the servo by pumping up the brakes then with...
  8. Remington rolling block

    90/110 rear door mods

    Hello All, not been on the site for awhile but im back now. I want to modify the rear door on my fender90 but don't really know the best way to go about it. ok this what I hope to end up with. a rear window I can ( lower, swing or remove ) but if poss keeping the lower half of the door intact...
  9. Remington rolling block

    Its happening again

    Hello all, Way back in august last year I had a few problems with power loss after I changed an oil pump. The power loss I fixed ( split turbo hose) But my original problem ( oil pump) is back... Ok this is what happens, Short drives, cold weather no probs. it plays up once a go a distance or...
  10. Remington rolling block

    Sluggish 300TDI

    Hello All. I haven't been in the site for a long time, used to be Cogswell&Harrison but it wouldn't let me log in. Ok my problem is. Defender90 300TDI (1996), just fitted new oil pump, pressure release valve and spring, oil thermostat, radiator and belts. Its running nice a quiet, oil problem...
Back
Top