Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Dreamed

    Freelander 1 Inlet nut came loose. How to glue copper + ABS?

    The copper nut that holds inlet manifold to crankcase came loose. It basically came out of the plastic hole that holds it. I marked it in the picture attached (ignore the useless blue line :D). I tried several methods of gluing it back into the ABS plastic, but every time I screw the inlet back...
  2. Dreamed

    Freelander 1 Battery light flashing, erratic idlING

    Hi guys! Driving home from MOT , battery light started flashing. At first from time to time, but 3-4 days along the line it always shows up a few miles after startup. Maybe it has to do with heat because light never flushes immediately after start (cool engine). The usual trigger is when I get...
  3. Dreamed

    Freelander 1 Rear brake nipples and bleed

    Hey there! I'm trying to bleed, but the rear brake nipples are hidden!! Whoever mounted the cylinders pushed them too much on the inside, so it's impossible to loosen the nipple. The screws holding the cylinder are rotten and rounded :D. I've tried to use some vice grips around the nipple, with...
  4. Dreamed

    Freelander 1 TD4 Brakes Guide Pins and Brake Pads Position

    Hey landys, Nab questions. I removed both front brakes (first time ever) and now I have doubts putting them back, as both sets are mixed together. I cannot remember which guide pin goes on top (the short one with plastic or the long one?). Also I see brake pads have one of the edges bent...
  5. Dreamed

    Freelander 1 Exhaust Box

    Hey, I'm trying to replace my exhaust box for my TD4. Do you know if I could get one that fits a Freelander 1.8 petrol? They actually have a different price tag for some reason, but they look the same...
  6. Dreamed

    Freelander 1 When to change gears

    When do you guys change gears when driving a TD4 manual? At the moment I'm changing around 3-3.5k revs, but it sounds as if I am forcing the engine and it might not be the best for its overall longevity. I'm interested in prolonging cars' life as much as possible. So I'd like to make an...
  7. Dreamed

    Freelander 1 TD4 Pressure regulator valve repair

    Hi guys, I have to 2 questions. I couldn't find a thread that explains how to repair the pressure regulator valve for TD4, using the repair kit. So I managed to take the regulator out. I have the repair kit 2-O rings. green and white I cant seem to be able to take the white O ring out of...
  8. Dreamed

    Freelander 1 Fuel Pressure Regulator Replacement

    Hi! Freelander TD4 2004 manual. Today I was trying to take out the fuel pressure regulator, but I failed.:( Basically the space is too narrow and I cannot even test what torx size I need. I took manifold out and I’ve heard some people took electromotor out. I unscrewed the electromotor but...
  9. Dreamed

    Freelander 1 Low pressure value after priming

    Hi I am trying to investigate a pressure issue. 2004 TD4 manual Could anybody with a diagnostic confirm with car in ignition mode what happens to LP pressure after the pump stops priming (1 minute)? My pressure drops from 360Kpa to 99Kpa. Also LP drops to 99Kpa when engine dies due to a HP...
  10. Dreamed

    Oxygen, O2, Air/Fuel Exhaust sensor

    Hi guys! So I've been roaming around all over the internet looking for an O2 sensor for Freelander 2003+ TD4, 2.0l manual. In fact Any Freelander I TD4. There seems to be none installed. Someone said it's The MAF sensor...but no, that's for the intake, has nothing to do with what comes out in...
  11. Dreamed

    High. Pressure sensor and Fuel Rail pressure plausibility P1190

    Hi guys! I have a Freelander manual, TD4, '53 plate, Facelift. After reading everything I could about fuel issues with Freelander I decided to ask for help as I'm a bit lost and I don't want to guess and buy things just to discover the issue is still there... I recently changed the fuel...
Back
Top