Search results

It was cold this morning 29F and my battery was dead. I jumped the car and when it started I got a HDC, ABS error that won't clear with my RSW diagnostic tool. Please advise.

Good day all.. This is a list of things I've done to my car. Then I will ask if the sounds and the way my engine is acting is normal. List: Heads rebuilt and resurfaced. New head gaskets- installed 22ft lbs and two 80 degree turns New lifters(32) New PCV and hose to valve cover New oil...

My car over heated and shut off. The next I found a radiator hose busted. I replaced it. when started the car there was white smoke.I pulled my spark plugs and found them soaked in oil. Any thoughts on why my sparks plugs has oil on them?

My keys turns and the car starts, but the key will not come out of the ignition when car is turned off. please advise.

I changed my valve cover gaskets after timing my M62 Vanos. I keep getting oil leaking onto spark plug #4 and smoke from the oil burning . What could be the issue? Please advise.

I'm getting a "Camshaft Control Bank 2 fault." error. I changed out the timing guides two months ago and re-timed the engine and the car starts fine. but I was getting a "Camshaft Control Bank 2 fault" error and the engine was making a strange noise and I was told it was the Vanos seals that...

It appears the ignition is clicking when I open the driver door. Has anybody ever heard of that?

Gents I'm getting a "Camshaft Control Bank 2 fault." error. I changed out the timing guides two months ago and re-timed the engine and the car starts fine. but I was getting a "Camshaft Control Bank 2 fault" error and the engine was making a strange noise and I was told it was the Vanos seals...

I'm getting a flashing battery light on my dash and the dash lights up and then I get a Transfer fail safe, HDC, seat belt errors, etc and the car dies. I also found out that I have bad vanos seals giving me Lambda, cam shaft control and misfire 4 errors. I put in a new battery in and then...

I'm getting a Lambda fault on bank 1 and 2 oxygen sensor aging fault downstream bank 1 I changed the the O2 sensor on the passenger side and error still apprears. What could be wrong?

I re-timed my 2004 L322 Vanos engine. I'm getting an " oxygen sensor aging fault Downstream bank 1" error. I changed the O2 sensor on the passenger side post CAT. Same error. What could be the issue?

I took off my valley and and stripped and cleaned the surface on the pan and the engine block. I reused my old pan and used Pro Seal red hi-temp RTV silicone instant gasket and my pan is leaking. I've done this twice now and same problem. Is it the pan or something else? I'm I not torquing them...

My name is Sylvester. I replace my timing chain guides on my 2004 Range Rover L322 4.4L. The car started fine. I put 9.5qt of 5/30 Synthetic oil and 4.5 gallons of coolant. I have a coolant leak coming form it appears the transmission housing. When I pop off the transmission rubber cover coolant...