Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. D

    Insurance renewal - what adds cost to the premium

    I am just about to reinsure my defender and wondered what kind of things will increase the premium. I want to include everything I intend to do this year but don't want to include premium increasing items if its going to greatly increase the premium. I don't do a lot of miles but do intend to...
  2. D

    Durite temperature gauge and sender check

    Is there a way to check a Durite temperature gauge and sender before fitting it to the dash/engine? I have purchased a new but old stock unit so want to check before fitting.
  3. D

    90 Defender rear crossmember 93 (k)

    I am looking at getting a replacement rear crossmember for my Defender 90, K reg (93). Looking around I have seen RCP do one that is from 3mm steel and includes the extensions. Has anyone used this type and can comment if it's good or bad? Alternatively, can you recommend a good one? Also...
  4. D

    Applying thread penetrant

    I currently use Plusgas for my thread penetrant but I am also considering a 50/50 mix of acetone/ATF One thing I have noticed is how difficult it can be to apply to the area I want it. My Plusgas is in a tin, not a spray can. Many times the area of application is in an area with little room...
  5. D

    Independent engin temperature gauge

    I have a 300tdi and I am a bit paranoid about overheating. I know the 300tdi can cook due to coolant loss as the water pump is located near the top of the engine. The original radiator when I purchased the truck had a slight hole and this almost created this very situation, but thankfully I...
  6. D

    Rear brake locking after new brakes.

    I have just swapped the rear axle case on my Defender 90 and at the same time I gave it a bit of a refurb. It's had new (refurb) case, new bearings (Timken), new calipers and discs (Britpart), new cunifer brake pipes (by me) and new Delphi/Lockheed pads. I have blead the brakes and the pedal...
  7. D

    Defender axle number identification

    Is there a way to identify a Defender axle to know I'd it is one of the ones with potential issues with weaknesses that could cause a failure. I have purchased an axle case that I was told was from a 300tdi, but the axle number is stamped in dots. Is it possible to identify it from the...
  8. D

    Stub axle oil seal

    Can anyone explain the difference between the stub axle oil seals. I have purchased some as I am doing an axle refurb and I have found the ones on my existing and donor axles are both different to the ones I have just purchased. The ones I have just purchased are FTC5268. The ones from my...
  9. D

    Wide set of radius arms needed.

    Wide set of hockey sticks needed. I intend to replace my front axle casing but my existing has the narrow 37mm ones and this one needs the later wider set. As long as they are OK I am happy to refurbish them myself as I am on a budget so not looking for anything fancy. I am located just north...
  10. D

    Bulkhead repair thread with lots of images

    Can anyone point me in the right direction of a thread with lots of images of a bulkhead being stripped down and repaired? I am sure I have seen one but I have searched on the net and a number of forums and can't find it. The thread I am thinking of had lots of photos but the person doing it...
  11. D

    Paint adhesion - best method for axles and chassis etc

    I am currently doing work on the underneath of the truck. I am having to change an axle case but have outriggers on my list. I have noted that corrosion mainly occurs in moisture and crud traps. On my chassis I have been brushing it down and applying Lanoguard. K have chosen Lanoguard as I...
  12. D

    Wanted 200 ltr Plastic Barrel - Rossendale/Bury

    I am looking for a 200 litre plastic drum in the Rossendale or Bury area. I would prefer one with the screw or clip on top, but if it doesn't it's not a problem. If you can help, please let me know. Many thanks. Mick
  13. D

    Larger spanner sizes

    I currently have spanners ranging up to 24mm. These are generally combination spanners though I think I have open up to 26mm. I am currently working on my rear axle and the A frame ball joint is 30mm. I have sockets to 32mm, but these won't fit on this nut due to restricted space. So, before I...
  14. D

    Front and rear wheel bearing kits

    Can anyone tell me the difference between the front and rear wheel bearing kits. I can see DA2379G (front) and DA2380G (rear). There is a difference in price but I am not sure what the difference is in the content. ATB Mick
  15. D

    Forum donation

    I have had a problem with my swivel pin housing and I was helped by a member of this forum who kindly sent me one. However much I asked for details so I could buy/reimburse this from him he insisted he would not take anything. I don't like being a taker and as such I said I would make a forum...
  16. D

    Brake caliper stripped thread - OK to helicoil?

    In the course of refurbing my swivels and hubs, I have stripped a thread when refitting the brake caliper. It seems odd that this one has stripped as it was the other side that needed action to get the bolts out - typical! BTW I was using a torque wrench when putting the bolts in. So, can I fit...
  17. D

    Britpart Lynx eye LED headlight wiring

    I have a pair of second hand headlights which I believe are Britpart Lynx eye. As I don't have any fitting instructions, could anyone tell me if they are a straight swap or do they need any alterations to the wiring? Thanks for your help. Mick
  18. D

    Possible oil pump for dif oils etc

    Just in case this is any good for dif and transfer box oil changes etc.... https://www.lidl.co.uk/p/car-care/ultimate-speed-oil-pump/p45978 Says in store on Thursday.
  19. D

    Low mileage but long life tyre recommendations

    I am looking to replace a couple of tyres and I am looking for suggestions and recommendations. The tyres I am replacing are starting to split due to age but have lots of tread left so I am looking for something that has better ageing qualities than milage. I have heard that some tyres have...
  20. D

    What swivels have I got?

    I need to replace the swivel balls on my defender, but it is a bitsa so I need help on getting the correct ones. The defender is a 93 model but it has a 300tdi fitted and disc brakes. The front axle has the thicker drive flanges an my alloys can't have the central caps fitted. I will include...
Back
Top