Search results

Hi all , I have my insurance with Adrian flux , does anyone know if it’s possible to put 2 Land Rovers on one policy for a short time ? The reason for this is I have a 110 but I’ve rebuilt a 90 which is nearly done and I want to put the 90 on the road and sorb the 110 but while I’m mot the 90 it...

Hi all , I recently brought an eberspacher from eBay and this came with it , it’s a PRO LATCH R latching relay https://sterling-power.com/products/latching-relay-control-pro-latch-r?variant=882713759 link here , I was going to fit a ctek battery split charge system , but was wondering if this...

Hi all got some unwanted bits off my new project terrafirma 2" lift kit with rear dislocation cones £100 now sold mantec snorkel £50 side step/bars £50 now sold all in good condition the suspension bits are about 2 years old collection from Stafford pics below cheers Ian

Hi all , I've done a web search to no avail , looked on the chassis drawings that I have in my workshop manual and there not even on there so thought I'd ask on here does anyone know or could measure off there own chassis were the front ARB mounts are situated please ?I've got the mounts ready...

Hi all , started my new project the other week , she's already stripped so thought I'd put some pics up of the work to do have already had the chassis and bulkhead blasted which highlighted a fair bit of work on the chassis but bulkhead okay just the driver's side footwell but have decided to...

Hi all, have started my new project I acquired a 300 tdi 90 off my stepson and have this week started the strip down. I've decided to build this for road use only as a second car if either mine or the wifes breakdown and I've got the 110 I've just finished for green laning and that . So while...

Hi all, got some bits lying around after doing my rebuild up for sale , haven't put any pics up because of the amount of stuff , so if your interested let me know and I'll take some photos for you of the bit your interested in and post them up for you. Will post some stuff at buyers expense but...

Hi all , I've got an old transfer box in the garage so have decided to have a go at rebuilding it. Its a suffix E box it was off the stepsons 300 tdi the front bearing had collapsed , so I've part stripped it down and fetched the input gear out now I've become confused . I've been on the...

Hi all , I've got a 200tdi is it normal to find oil in the pipe that goes from the turbo to the intercooler? There wasn't loads but it was quite wet . Cheers Ian

Hi all , in the finishing stages of my rebuild and starting to go through my snagging list and my rear heated screen doesn't work, its a 200tdi 110 its had a complete new loom and the instrument pack has been upgraded to the td5 clocks and warning light panel , I've put a new relay in and its...

Hi all, the drain plug in the fly wheel housing on my 110 is stuck have tried nocking on a smaller socket on but it won't budge , it was left in by the previous owner and when I did the rebuild I thought it would be easier to get out when the engine was installed as we have a pit but I was...

Hi all, took my 110 200 tdi project for its mot Tuesday it failed sadly the one failure was the power steering. It was none exsistant it's already had a new steering box and I replaced the pump this morning thinking it might be that, it is better , should it be as light as a td5's ? As it was...

Hi all looked on paddockssite but just to clarify it are the front props on a 200tdi 110 the same as a 300tdi 90 ? Cheers Ian

Hi all just installed a twin alternator and battery set up, should the negatives on the batteries be linked ? As in auxiliary battery to starting battery to earth ? Cheers Ian

hi all, which wire is the 1st accessory of the ignition switch (+12v) ? is this the white wire ? And when it says that 2 pins on a relay are normally closed but can be connected ..... does the normally closed bit mean that you connect the 2 pins together ? cheers Ian

Hi all, I know a few people on here have one of these after reading some other threads. I've got one was brought as a present for me for my rebuild 200tdi 110 have had the screen fitted for a while and I have just come to fit the loom and control box and have realised its got the genuine land...

Hi all, I am just about to start wiring in my extras on my project but just want to clarify a few things before I start as I don't want a big fire before I've had chance to drive her so here goes. Everything is run through a auxiliary battery via a fuse board with relays , can the earths for the...

Hi all, bumper strengthened across the top and underneath sprayed and fitted so here's some pics as promised hopefully she will be finished in a couple of weeks and MOT'd and on the road then I shall hopefully be joining you all at Landyzone 2017 :D. Just one question to all who have a winch...

Hi all, am thinking of fitting a 2nd alternator instead of a split charge set up I can get the mounting plate from glynn lewis, they also do a wiring kit but its £100. I can get the bits off ebay for less but not sure which relay I would need, does anyone know whish relay would be suitable ...

Hi all, as anyone ever fitted, no someone who's got one fitted or got one of these fitted to there defender http://www.nkgroup.co.uk/product/vehicle-acoustic-engine-blankets/ if so are they worth the dosh ? cheers Ian