Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. jimmacD

    P38 2.5 FIP fuel flow.

    Hiya Peeps! On-going fiddling with my project P38. Serviced gearbox, changed leak off pipes, new lift pump, new cooling parts and radiator. Starts on the button hot or cold but still a bit sluggish on the get go? I known the diesels with an automatic box are slooooooow but I still want to reduce...
  2. jimmacD

    1999 P38 RF receiver is missing?

    Hiya Peeps! Working through the jobs on my project P38, noticed someone had been into the rear driver's side parcel shelf. Had a peak and the RF receiver is missing, the wiring is there but no box? As the driver's door handle had broken (new one on it's way) and the main key was a bit worse for...
  3. jimmacD

    P38 Driver's external door handle?

    Thought I would see why the P38 won't lock from outside. The plastic bar retainer which goes into the back of the door handle/lock has broken off. Someone has previously tried to fix it with cable tie and washer. I think there is still part of it in the back of the lock. Can these locks be taken...
  4. jimmacD

    P38 Diesel intank sender...... pump only?

    Hiya peeps! Just wondering, has anyone just changed the pump rather than the whole sender unit? On my L322 I just replaced the failed pump, which was far cheaper than the complete unit which most suppliers want to sell. Trying to do the same on my Chrysler 300c touring but all I get is the sound...
  5. jimmacD

    Back to the P38 house of pain!

    Still a sucker for punishment, just bought another project P38 diesel auto after selling the last one for parts, when will I ever learn? It was dropped off with a known cold start issue and I paid accordingly. Previous owner put it down to glow plugs but my gut told me more likely lift pump...
  6. jimmacD

    P38 DSE stop solenoid bypass!

    Hi Peeps! My long term project P38 is being a pig. Continuing issue with crank no start, it was running fine and then one day... nope! No glow plugs light on dash, no lift pump and no diagnostic connection? I have checked and rechecked wiring and cleaned up footwell loom, tried good fuse box and...
  7. jimmacD

    L322 Light control module

    Hi Peeps! My 02 L322 has started doing weird stuff with it's lights.... headlights and rear lights staying on after ignition being switched off, have disconnected battery to save it running flat. No indicators. If I reconnect battery the car is fine until I switch it off and then a few minutes...
  8. jimmacD

    P38 2.5 dse in tank fuel pump

    Hi all! Looking to change faulty in-tank pump.... not the housing! Did this on my L322 with a BMW pump, can anyone give me a part number or BMW model that uses the same pump, pump only not complete assembly. Ta mucho.
  9. jimmacD

    Early P38 EKA code input?

    Hi all! Trying to help a friend out with his 1995 poverty spec 2.5 diesel P38. He left it for a while with the battery off and now has the dreaded "lockout" on dash. He has watched Youtube vids on using the EKA code etc.. but I have a feeling the process is slightly different on early P38? Can...
  10. jimmacD

    Where can I get RAVE for P38 DSE?

    Hi all! Really need a wiring diagram for my 98 P38 DSE to try and solve non start issue. I have tried various links and interweb but can't download anything? Seems a common problem. Where is the "technical" section on Landyzone? Am I being thick, just can't find it?
  11. jimmacD

    Freelander 1 td4 turbo vent filter query?

    Hi all, In the process of servicing my 05 TD4, fit and forget crankcase breather and turbo filter arrived today. I thought that the turbo filter, unlike a standard in-line fuel filter, only flows in one direction? Is this correct?
  12. jimmacD

    You tubers do my head in!

    Just finished watching a vlog from an umercan who claimed his L322 death rattle wasn't the vanos or timing chain issues but just a case of changing the power steering fluid and the noise goes away! Problem with that theory is that the power steering pump is on other side of the engine from the...
  13. jimmacD

    Back to my non starting P38 2.5 DSE... the saga continues!

    Does anyone have a wiring diagram for ignition, becm and ecu comms routes? Been busy with life.... fecking L322 threw a suprise spanner in the works with what I suspect is a failed timing chain guide.. totally out of the blue, started her up for School run and a bag of spanners rattles from...
  14. jimmacD

    How do I get avatar picture to load?

    Hi all! Been on here for a while and decided to upload a profile pic. How the feck do you do that? I have gone onto profile etc... choose file etc... but nothing happens? Cheers for any help.
  15. jimmacD

    1996 P38 DSE ECU Replacement

    Hi all! Back to the ongoing issue with my P38 project car. Posted a few months back that I had a "no start" issue... no glow plug, engine cranked OK, healthy battery, healthy fuel pump etc.. etc.. Cleaned all the earths, bridged the fuel pump relay and she came to life and seemed fine? Back to a...
  16. jimmacD

    1996 P38 2.5 DSE Non starter!

    Hi all! I have been starting and moving the old project P38 around with no problems. Went to move her this week and she doesn't want to start? Good amp battery, not immobilised, cranks OK but no glowplug light on the dash? I have checked the fuses and relays, checked for any broken or chewed...
  17. jimmacD

    Smooth as silk... when warm?

    Continuing saga of project FL 1 TD4 facelift with Jatco auto. I bought the car a month a go with a 2/4 brake solenoid issue and F4 limp mode. Took solenoid out and fixed it myself, two weeks of fault free motoring and a few miles under it's belt to see what drops off before the car goes into...
  18. jimmacD

    Auto gearbox sump removal.

    Hi all, just started to pull parts off to replace gearbox 2-4 brake solenoid on Jatco auto td4. I don't have a workshop manual and interweb stuff covers.. servicing, solenoid fixes and resistance testing but nothing about sump removal. I have removed intercooler pipe, egr valve pipe, undertray...
  19. jimmacD

    Freelander 1 rear passenger window glass.

    Hi all, previous owner broke the window trying to replace the window regulator. Car came with a replacement regulator and I have picked up another window. In the process of fitting the window, done loads in the past but this one is a little tight and unlike other cars the glass doesn't sit in a...
  20. jimmacD

    Freelander 1 facelift auto gearbox gasket???

    Hi all, usually on the L322 and P38 forums but took the plunge with a Freelander project. Usual stuff... 2/4 brake solenoid etc.. etc.. Have done solenoids and gearbox work on other LR but obviously the Jatco box is slightly different. I don't have a manual for the car yet, can someone tell me...
Back
Top