Search results

Hi ther I’m looking for a salisbury axle 4 bolt top bracket that has the ball joint taper in the middle, would collect from sensible distance (I live in wiltshire) but if too far then would want it posting. If you got one let me know don’t assume your too far away if you don’t want to post...

After a 3.54 crownwheel and pinion for a disc type salisbury axle, either new, NOS or good second hand, ashcroft don’t seem to list them, willing to collect if people aren’t happy to post if not too far away

I’m wanting to use a 97 - 01 alternator from a freelander, the sort that has a vacuum pump between the pulley and alternator, I’m generally enquiring about the oil system integrated in it. Is the oil for lubrication or cooling or both? Does the supply need to be restricted to a pressure? or...

In Dorset, well known area for floodin... And as a result...

Probably should have made note of this before I cut all me manky old pipes off. It's an '87 90, just two outlet ports on master cylinder, one normal M10x1 and other looks to be M12x1, it's okay, kept the union and she's mint, trouble is which is for fronts and which is for rears Cheers

Looking for a good second hand pipe from a 300 defender to go from turbo, round back of engine to air box, will need to be posted unless within reasonable distance of south wiltshire/north dorset, willing to pay for couple of beer tokens and clear the postage cost No longer needed thank you

Got a autobox from a 300tdi D1, needs to be taken away, was working when car stopped being used about 3 years ago, we did have to 'adjust' the shape of the gear linkage to get it out of the car, but nothing that can't be swapped over from your old gearbox Collection only from South wiltshire...

Wanted to make sure the injectors were putting out good equal pressure so let it squirt into me hand

In the process of putting a '98 disco 300 in me '87 90, ordered a few conversion bits from Steve Parker - would recommend highly, good website, delivered quickly and fantastic quality -, got a temp sender as I knew that the disco sender will make my gauge read incorrectly, but what has been...

As title says, I have got my steering box removed and apart as bottom dust seal was in pieces, (had done its job, box was full of oil and not leaking), and the worm shaft has worn through the case hardening in the straight ahead position, and the 'wheel' that it turns against is pretty worn all...

Who's going and what are you hoping to buy that you sort of need now, but hopefully will be cheaper at the show, then you don't find one or the're all too expensive, come home without it, then panic more and have to order it online anyway? Been there done that.

My Brother and I are thinking of making a landrover of a challenge truck style. Make a chassis out of 3-4mm wall rectangular box of a similar size to an original land rover chassis with the intention of competing with the vehicle. How do we make it road legal? ie. type approval

Thinking of a pto front winch off the crank pulley, thinking of using a cut up axle to turn the drive through 90 degrees and have a brake and some decent bearings to put a drum on, gearing it down so its not ridiculously fast shouldn't be too difficult, I just need some sort of a clutch to...

Anyone have permission to privately owned fields or similar that a few people could go and have some fun driving about in, vehicles with rear drive and optional 4 would be better suited to what I have in mind. Wiltshire/Dorset would be ideal but would consider further, would be happy to top up...