Search results

Hi My Discovery 3 2.7 tdv6 when first started or left for a few hours and then re started has a slight timing chain rattle for maybe 2 seconds. I understand that the chain tensioner relies on oil pressure to fully come up to tension. Is this something i should be concernd about. If so how...

What rpm are people getting at 70mph on a discovery 2 auto? Not sure if i have a issue with my discovery as not sure if its reving to high on a run. Also When going up hills around town the speed drops off quite quickly and it drops down a gear then it revs up to try and get the speed up but the...

Does any one no what grease is in the wheel hubs on my d2. Ive removed half shafts for some other work, obviously removing the wheel speed sensors you can get to the bearing cavity i was thinking of putting a squirt of grease in the hole it looks like a blue grease? Cheers Sam

Could anyone advise me the best place to get a recon diff for my disco and how many splines are the halfshafts in a standard discovery 2 td5 Cheers Sam

I hope some of you can help me with a noise that developed on a recent 750 mile round trip with my disco 2 td5 Auto. The noise only appears to be present on overrun but i did notice that on acceleration a couple of times there appeared to be a flapping/rattling noise which would then disappear...

Morning all. Ive Just bought a td5 disco and carried out a service on it yesterday. I thought id check the red plug for oil and yes theres oil in there. Ive removed the ecu and sprayed contact cleaner in the plugs and the sockets on the ecu. Is there any reason why i cant leave ecu off to drain...

Good evening My landrover 90 has developed a noise at speeds of about 55mph+ .Coasting or on overrun it sounds like the noise is is comming from the rear end ive removed the pannel from the seat box above the transfer box and taken it for a run. It doesnt sound like its from the transfer box/...