Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Roaming Wombat

    Tow bar fitting problem

    Trying to fit a drop plate tow bar today to my 90 and the chassis arms/braces are too long by about an inch. The cross member is new (300TDi). Any ideas? Are these arms different lengths between TD5 and TDi chassis or defender/disco TDi?
  2. Roaming Wombat

    Power drop off on hills

    So I took my 90 300TDi on its longest trip this weekend (about 100miles each way) since I got it, mainly dual-carriageway and motorway. After just under an hour, the revs dropped off to nearly nothing, when going uphill and dropping a gear tio get the revs up gave nothing (5th to 4th). What I...
  3. Roaming Wombat

    Forgot the wading plugs

    Title says it all, forgot to put some wading plugs in and ended up going though some water up to the bottom of my doors at the weekend, was probably only about a 20m section and went though it without stopping Should I be worried? What should I be checking? I have extended breathers it was just...
  4. Roaming Wombat

    Name that antenna

    Anyone able to identify what this type of antenna is called? Managed to sheer it off :oops: while tinkering with my wipers. It was mounted on my wing, I assumed it was for the radio but I'm thinking not as it still works...
  5. Roaming Wombat

    Wanted LR90 Parts

    Wanted to fit a Land Rover 90: Rear upper A-frame link arms - condition doesn't matter Rear upper A-frame link arm brackets - condition doesn't matter Upper A-link balljoint bracket/housing (bit the ball joint fits into) - with or without ball joint Upper steering column - 36 or 48 spline...
  6. Roaming Wombat

    Something a-mist?

    Took the blower air inlet duct off today to fit a bilge blower and when I re-fitted the the ducting I noticed it doesn't quite face up with the heater/blower box. See the distinct gap in the picture (the gap is actually about twice what can be seen because of the foam I stuck on before putting...
  7. Roaming Wombat

    Rear Shock Absorber Replacement

    So I need to replace one of my rear shock absorbers (its leaking a lot), is it worth doing both at the same time or should I replace as a pair? Also, do I need to be wary of the length of the new parts to allow for the 2" lift? From searching already. I know I'll likely need to WD40 the fook...
  8. Roaming Wombat

    Small Electrical Fire

    Had myself a small electrical fire this morning, thankfully got the battery +ve terminal off before any flames started. Safe to say I was touching cloth after.. Anyway, the smoke was coming from the dash/column followed by the fuse box and on inspection the headlight switch connector looks to...
  9. Roaming Wombat

    Mismatched Exhuast Ends/Brackets

    The Exhaust bracket on my back box is a different size to the mid section bracket (so they don't line up and are currently held together with 2 bent M8 bolts... needless to say they won't tighten up enough and the whole thing rattles like bag of spanners in a washing machine... I'm guessing...
  10. Roaming Wombat

    Spot Light Stone Guard

    Does anyone know where I can get a replacement (non- Wipac) stone guard for 8" spots? One of mine has departed company... Can find the Wipac and KC ones easily enough but mine are plain (no logo) ones, which I prefer, the Wipac logo ones block too much of the light.
  11. Roaming Wombat

    Halfords Ratchet Spaners Deal

    Looks like Halfords have currently got their 12 piece ratchet spanners set on offer at £30 less than the smaller 9 piece set. 12 piece set currently £50 9 piece £80 http://www.halfords.com/workshop-tools/tools/spanners-wrenches#compare=811703|811701
  12. Roaming Wombat

    Wanted Upper Steering Column

    Anyone got an upper steering column from a 90/110/Defender to fit a 90. 36 or 48 spline. Can collect South Wales/South West area.
  13. Roaming Wombat

    Wanted 48 spline steering shaft

    Looking for a 48 spline steering shaft (upper column) for a 90/110/Defender South Wales area, can collect.
  14. Roaming Wombat

    Loose Steering Wheel

    I currently have a quick release steering wheel (tratter came like that) but when fitted it seems a have a fair bit of play between the splines and the boss. The shaft isn't 36 or 48 spline, its got a large "flat" spot on the shaft to key the steering wheel. Any one else experienced a loose...
  15. Roaming Wombat

    Wanted 90 Steering Wheel

    I'm needing a steering wheel, with or without boss, for a 90 without air bag etc.
  16. Roaming Wombat

    Steering Box tie bar replacement

    When taking my sieve of a steering box off on my 90 I discovered the tie bar had sheared in 2. (source of loud bang discovered!) The one I took off has slots for mounting it to the steering box, the replacement has holes. On the slotted tie bar it is a snug fit for the steering box mounting...
  17. Roaming Wombat

    Cleaning up trailing arm bush housing

    Trying to push in some new polybushes (Bearmach) into my rear trailing arms (were rubber bushes before) and they just don't want to go. Currently I'm using a length of M12 threaded rod, some washers and M12 nuts to push them in. This method worked fine on when I did the radius arms. Looking at...
  18. Roaming Wombat

    Wanted Defender Cubby Box

    Wanted cubby box with cup holders for defender/90/110/130 etc. locking or not locking, no preference.
  19. Roaming Wombat

    Front radius arm axle bush sizes

    Does anyone know what the following sizes are for (on a 90): Front radius arm width (axle end) - Narrow type Front radius arm width (axle end) - Wide type Radius arm axle bush width - narrow type Radius arm axle bush width - wide type I've lots of posts, and general googlings saying there...
  20. Roaming Wombat

    Replacing knackered bits (90)

    After many weeks of fighting my (first) 90 I bought in the summer and 4 trips on a big yella' taxi trying to keep the wretched thing on the road and running I've given into taking it off the road for a month or 2 to replace all the worn parts so I can finally start adding bits instead :rolleyes...
Back
Top