Search results

Thanjs Sierrafery

Will do, thank you Just thinking , would it matter if the MAP sensor i tried came from a 2001 reg and mine is a x reg? Paul

Hi all, long time no post, on my nanocom my MAP sensor is reading 120deg. And im getting a fault code. 2.1 inlet air temperature circuit 4.1 inlet air temperature circuit 6.1 inlet air temperature circuit I have tried another known working unit and still the same, does anyone have any ideas...

yes they could have disabled it, but left the ram in.

Yep not far at all :)

Went Greenlaning for the 1st time in Poppy, was pleased on how she performed , me thinks new tyres though :)

Well after a few days, so far i'm happy, Going Green laning tomorrow weather permitting, will see how she handles on a longer run than to and from work. I would say it's a easy enough job, just make sure you have a full compliment of large grips to help with the front bar and clips ( if your...

Hi James After further investigation after splitting down the unit , the pipe was gone as well, and it looked like i would have done more damage to the top pipe as well removing it, all the back end was really rusty, front pipes were looking quite bad as well, On reflection of this i decided on...

This weekend I have Put my new Bumper on ( need to get winch) fitted light bar and loosely fitted spots, may change them for LED's Taken off old running boards to aid in ground clearance Found out my ACE is leaking :( but with the help of James hopefully it is fixable.

Hi James Had a look today, i loosened the 2 bolts off and the plate seemed to come free, so hopefully i can split it all apart ok. You mentioned a fitting dolly and O Ring. do i need to get these separately ? or do they come with the collet, i'm going to order the bits tomorrow , hopefully...

Does the system need bleeding? If so how? And what fluid do i use. And shall i do both? Thanks for your help james

Thanks sory mised it

Thanks james. Is there a part number?

Hi All , whilst putting my New bumper on today i noticed a rather large pool of oil under the ACE block unit. on inspection it looks like the bottom pipe seal has gone, pipes look ok , dirty but ok. Question is this, after reading all the threads on repairing it or remove it , i can't seem to...

Yes that's the one, i went a couple of years ago with my Series 2a , but it is more boingy orientated. i now have said Boingy so need to go again :) Nice wheel cover BTW :)

Do you go to the muddy ducks in Stone?

Will do, i havd a gold d2 now, i was running around in the green d1 with the union jack on the bonnet, but rust took her away from me

Aylesbury for me :)

1 day left on Fleabay This is a great fun off Roader, If you like your series you would be mad to miss out :)

Hi All i have to sell my Series due to financial reasons , Sad day, but needs must Here is a picture in all her glory at Sibbertoft Full details can be seen on Ebay There is no reserve, and the starting price is well below what i have been advised to put her up for , just for a quick sale...