Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    L322 4.4 m62 gearbox cooler o rings

    Morning , does anyone know what the size o rings on the trans cooler Hose push fit connectors , got leak on fitting , I’ve watched YouTube vid but his measurement were vague , thanks Johnny
  2. J

    Bmw m62 with lpg help please

    The vanos was timed with bmw tool kit and checked with multimeter as instructed in the bmw guide ,i started from scratch ie reset cams etc etc.
  3. J

    Bmw m62 with lpg help please

    Done all the timing via the bmw tech guide ,new chains and everythink inc cam sensors and on start up im getting codes 0011 0343 ...live data says timing advance is between 0°and 16°ie jumping back fourth ...symptoms are rough idle ,i bought it cheap as timing guides had had it and bloke...
  4. J

    P38A Autobox removal

    Good morning, just in middle of taking my autobox out using rave and autodata...do I have to take out the main round beam under the box as all bolts are out but struggling to move it.. The beam has the gear box mounts on it and bolts to chassis either side.. Many thanks ..
  5. J

    P38A Bmw 2.5 derv engine sensors

    Killed another head this month ..my own fault ...bought a 2nd hand good head ...but the 1 brown water temperature sensor is 2 pin and mines 1 pin ...I understand these are diff with year of production..will it still work if the loom I have is 2 pin as well...coz it's working with 1 pin sensor...
  6. J

    RANGE ROVER P38 NEED HELP PLZ!!!!!!!!!

    I was thinking coil pack plugs doesn't the maf just default in ecu like many other makes of car ...
  7. J

    P38A upper ball joint laughing at me

    Think you are correct bruv
  8. J

    P38A upper ball joint laughing at me

    When u look up where the spindle ised to be with torch ...there is no shaft or step to suggest anything is there to push up on
  9. J

    P38A upper ball joint laughing at me

    P.s the ring was correct ànd I have a different machine ..the vice one ...I was doing it right with my machine ...I've tried heat n hammer so far ..other side is same ..
  10. J

    P38A upper ball joint laughing at me

    Hold on...there's no shaft to press out ...it's the top corroded on ....everything else has been burnt alive or fell out lol
  11. J

    P38A upper ball joint laughing at me

    Thank you nick...was probably my fault as I didn't have a smaller adapter ring on ...many thanks for educating me ...saying that they are corroded to bits as well and the adapter ring makes pure sense...been avin a nite mare. .nerve in back went ..then 2 days ago groin strain from running...
  12. J

    P38A upper ball joint laughing at me

    Haven't got any of the above products and no money mate...I was just going get grinder on it and see what falls out or blow torch n hammer lol or both lol...
  13. J

    P38A upper ball joint laughing at me

    '][/URL] is it grinder and chisel time yet
  14. J

    P38A eas and axle stands

    Got eas working ...we have lift off....
  15. J

    P38A eas and axle stands

    Doors were open ...was a good whack on hub carrier and it dropped eas....now on eas button I got lowest setting flashing and highest level flashing
  16. J

    P38A eas and axle stands

    Eas is throwing a hiss fit and won't move ....upside down it is then ....
  17. J

    P38A eas and axle stands

    Doing my upper and lower ball joints ...I've placed axle stands under axle ...just got my swivel hub carrier off after some trouble ...trouble is the air suspension has now lowered itself ...is there anyway of getting the eas to work on axle stands ?....now I can't get enough clearance to...
  18. J

    p38 viscous to electric fan???

    I done this electrickery fan mod on my 2. 5 diesel ....works better than the viscous fans I bought from island4x4...I have now installed the disco viscous unit also with back up electric fan set at 96°......
  19. J

    P38A jacking up and axle stands

    Watched the video a few times last ...I'm half way thru .only get a hour or 2 each evening ..last night was hell...both brake backing plate nuts corroded. ..disc screw loctite in with corrosion as well...drag link ball joint corroded in sleeve...broke the taper and bugger ain't avin none of it...
Back
Top