Search results

Hi all, I hope that someone can point me in the right direction. I have a P38 Diesel that has developed a problem .It starts and runs fine in neutral and revs freely. However once in Drive it has no power at all .The box changes up and down ,but the engine is very lethargic . The car will not...

Hi all, I am intending to add a thermostat attatched to the 2 aircon fans to aid cooling(if needed) after towing up long climbs or sitting in traffic. I want to be able to st the temperature just above normal. With this in mind I have purchased sais thermostat but it las a long 2" 5 mm dia...

New windscreen fitted today, heating element on drivers side open circuit. £355.00. Bridgewater windscreens in Worsley Manchester Nice people, polite good price and a neat and tidy job

Hi all looking for anyone travelling between Oldbury and Bury Lancs in the next few days .I hope to buy a small lathe 1m long x500mm wide and high 95kg. if anyone can help, I have beer tokens. thanks Mick

Hi all, not been on for a while (having such a reliable motor). I thought I would repair the seat heaters and uprate the thermostat at the same time, but cannot find the stats anywhere unless I buy a £45 kit ( NOT Happening. ) Does anyone know where I can get them please, Thanks

Hi all, my SRS lamp not going out and Nanocom says something about warning lamp. I am wanting to replace bulbs first (I know there are 2) does anyone know which bulbs they are please .Then I can drive to shop rather than trudge through the snow. Thanks Mick

Hi all, been playing this weekend ,(Maintainence mainly) I tried to move the wastegate acuator and it doesn`t move. I am thinking it is seized. Nanocom showing no boost so this confirms it I think. Is it possible to free it or shall I just take the Turbo off . Any thoughts please. Thanks all.

Hi all, does anyone know the gap needed in the air con pulley. Mine has been squealing and has thrown a belt so as soon as the weather warms up ( June) I intend to remove the pulley and service it. I cannot find the spec for the gap anywhere. Thanks in advance

HELP, I have an electrical problem and I am at a loss. I have had the fuse box out and there are no burnt or blackend contacts either side. I have no power to the Hevac panel and cannot find which wire should power the panel. also the lights indicating the suspension position are not lit...

Hi all, does anyone know of a good auto electrician who understands the P38, in the North west of UK. I have a gremlin that needs sorting. thanks.

Hi all, on Saturday I did some shopping and on my way back , the car was at tickover at the lights and smoke appeared under the bonnet. I managed to get the car home and thought it must be the fuse board. However, further investigation revealed it was the wiring to the alarm klaxton. The 2...

The old girl passed her test with no advisories yesterday. Shows that all the work done in the first lockdown has paid off.

Just spent a pleasant afternoon replacing the plugs (green) by the A posts . Now the Nanocom will talk to the suspension and ABS. The only problem I have is that now I cant stand up or walk. 3 hours on my knees have done me in,but at least I shouldn`t have to do it again..

Just a warning to anyone buying off E bay from apex autos in Carmarthen If you have a problem, they will not respond to emails texts and the phone is unavailable to connect. I purchased a seat cover which is falling to pieces after 8 wks

Hi all,as title suggests my Nanocom talks to the EAS without problems but it wont talk to either the HEVAC or the door outstation . however 2 or 3 days ago it was ok with both. Is there any fuses that I should know about? Any assistance gratefully received. Thanks

Hi, I have the above in the boot of my DHSE, and do not know if it can be tested. the two speakers on the top are tatty round the edges but I believe that they can be replaced for a few pounds. I am missing the disc player but I will replace this Radio works ok and controls on wheel work. I...

Hi, replaced all my brake pipes with "kunifer " pipework and intend to bleed the system, I have a Nanocom Which appears to have a brake bleeding facility on it, but I can find no information on how to use it. has anyone used theirs and can help Thanks

Hi all ,today I removed the rear section of the exhaust, to help with access . the said exhaust was fitted about 18 months ago ,I am told and by the looks of it ,that looks about right. The exhaust was made by A2A a British ( it says) quality as OE (it says). I will let the photos speak for...

Hi has anyone removed the radius arms and re bushed them . Are they difficult to get rubber bushes in them, mine are plastic by the look of them. thanks

Hi, just been under front of new "different" car and I notice 1 side of car ball joints are new, other side old .Doesn`t make sense to me. Does anyone know the no for the press set please, then I can do the other side to match. Thanks