Search results

Good afternoon guys The wife unit The other day said her brakes were noisy so I had a quick look and I noticed the caliper pins were dry so I greased them up but noticed one pin a different shape, it was in the bottom and the other side it was fitted in the top, I've got her some new pads and...

Hi everyone got my wife a manual td4 54 plate freelander 1 and I knew it had the propshaft removed by a garage and ripped the old guy I bought it off. So I'm looking at fitting a second had one there's a bloke near on Facebook stripping both a auto and manual car. But only has the propshaft on...

Changed and programed bcu Got it running now only thing not working is central locking unlock it locks fine. And needs to program the keys but I have a hawkeye. I've tried before admittedly with the old bcu and it didn't work.

Yesterday I got a replacement interior fusebox and bcu Just plugged the fusebox in and the instrument panel lit up and the side lights came. So I took the battery off. Quickly checked and my car is a 2000 and the fusebox is off a 2002. Slightly different one extra relay on the front. Does...

Finally got to play with my D2 td5 today. I've had a few electrical gremlins due to water ingress. I only have central locking at the door and dashboard switch until I turn the ignition on. It then doesn't work until I take the battery terminals off and back on. It then works again. Also the...

Any one ever heard of this company

Just a quick question I have a X reg D2 td5. That I've not used since October saving up for parts not etc. I did leave a battery charger on but some thing tripped out the sockets. So the battery whent flat and when I next checked on it and recharged the battery the key fob is not recognised and...

Hi i've just finished repairing my compressor i still will change the piston seal when i buy one and the brush springs or make some stronger ones when i get time. i will try to make a full strip down and rebulid post this weekend but heres some pics for now.

Hi any one got a cheap spare for sale

Im going to fix my compresser as the bushes are worn im taking pics to do a thread .but wondered if any one got a old one cheap that would do for now in the Holbeach area or further afield.

I've just bought some pipecleaner today i then pulled out the beer pumps out of the barn to clean them but rain and hailstones did it for me. The only bit I need is another tap to go on the end of the pipe. I think it's in the other barn I will look later as my 5 mins of play time is over got...

The first thing I replaced was the rear hub last year pics will upload soon the next was I couldn't get any gears so I changed the master and slave cylinder . then the battery whent flat intermittently I found two things wrong the first was the terminal's on the battery were loose and it is a 7...

Just found a cheap AC/DC clamp meter from maplin forty pounds I normally use a fluke 365 At work but for that money I'm going to keep it in the back of the car. I also compared them at work and found it spot on I took some pics to show people hope this might help out some people.

After filling up with fuel my Td5 would not start I first checked my battery terminal's as they sometimes come loose, but they were all ok. I then remembered that it was just the same symptoms as I've had once when the inter light had blown its fuse and stopped the immobiliser. So I looked...

can i repair a leaking hub on a disco 2 or is it a new hub and then if it is Rimmer bros is only 7 mins away and they doe three hubs TAY100050 a cheap ish one for 120 pounds an OEM for 170 ish and then ive read that is has been replaced for TAY100050G which paddock do for 170 and the old...