Search results

750kg lifting slings 2.1m Used once to sling a pack of round tube. Pack of 3 for £9 Inc second class postage. I can get quite a lot of these so I can do more in a pack if needed :) Being white they do show the millscale from the steel .. Perfect for engines ect Pm me

About to go to work,pull out the first road and bang,loose drive. Thought it mightve gone into transfer box neutral, nope still in drive but nothing. Put it in difflock and drives with no bangs,prop shafts both look fine,can't see anything obvious underneath. Pulled the drive flanges and they...

I recall reading somewhere on here that the shaking mot ramps are terrible on old cars. Mot before last went in, steering feeling good but came out abit iffy. Ended up being the steering shaft,it was a non genuine part so I put it down to that and replaced it with geniune,was as good as a...

So my trusty 300tdi doesn't sound right,well atleast I don't think it does. Sounded a lot more rattly than it usualy did on the way back from Harrogate to Birmingham. A turbo pipe popped off too, these were just bodged together bits when I did the conversion so I've now replaced them with Steve...

So my old 110 got smashed into by some idiot getting away from another car he just crashed into. I've attached pics of the damage. Not really sure how it all goes together back there. It's a tithonus with a fiberglass top. Do I need to just drill out the rivets holding the tub edge cap on and...

Well I've finally decided I don't need my 110, havnt driven it since the start of the year. This one, lists most things done. https://www.ebay.co.uk/itm/Land-rover-defender-110-tithonus-300tdi-/224553483445?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0 I do not want...

So I've got an Lt77 with a 300tdi in the NA position in my '86 110, Always wanted an auto though, and abit of a kit popped up on ebay from a disco 1 and it didn't go for a whole lot of money, I'll probably get more back for the lt77.. Now for the questions, looking at the picture is there...

Just changed my aging g90s as they were feeling quite iffy in the wet, Had some Cooper Discoverer STT fitted, garage couldn't balance them on their machine. It tracks bang on I can let go of the steering wheel and it'll carry on straight, no play in any joints ect I've even put my spare...

Bit of an odd one, this morning they didn't work, high beam symbol in the dash slightly ilumanated which made the headlights and side lights stop working, flicked it on and off and it went back to normal. Now the high beam symbol is permanently slightly ilumanated and I can't get the...

Im currently installing an Alfa Romeo seat in my 110, it's quite abit bigger than the standard Exmoor seat I have, Got it bolted down but the steering wheel is much too big, I really didn't want a small steering wheel but looks like I'll have too if I want this. I don't have a ton of money for...

300tdi, My turbo has started whistling quite loud all of a sudden under load, Can't replicate it without a load so I can't tell exactly where it's coming from and all the pipe joints are tight. Minimal play in the turbo but a little bit of oil, about the same as all the other 300tdis ive had...

Thinking the other day, the last time I actually had to fix something on my 110 was in April 2018, when the clutch master cylinder went and that was my fault as I fitted a cheap one when doing the 300tdi conversion,genuine one now. Gets driven around 30 miles everyday, not bad for a 33 year old...

I've always bought dayco belts and they've always squeeled quite bad, especially on full lock and they seem to fit quite loose. Tried a gates belt today, completly different material and went on really tight, no belt squeel and the full lock noise has gone. With the tensioner pulled back, you...

So clearly I need another project to add to the list. :rolleyes: How feasible of an idea would it be to have an electric motor hooked up to the PTO output on the transfer box that would work in conjunction with the engine rather than running the car on its own? I was thinking a bit more...

Does anyone know how/if the mirrors in the spafax wing mirrors can be removed? I dont want to go breaking them :rolleyes:

I orderd a few bits to convert the windscreen washers on to the wiper arms, then realised I don't have just have a single nozzle but two separate ones on each side of the screen and they work fine. Is it standard to have 2 seperate ones on the earlier 110s?

1986 110, I either damaged my cables when changing the engine or when I changed the heater matrix but Im only just getting around to sorting it. Could someone tell me what the cable on the top on the heater box and the one down the side does please?:D Currently I can change where the air...

I have the application center just down the road from me so thought I'd give it a go. Seems to be very popular in Canada/USA. Booked in for Tuesday, If anyone's interested I'll see if I can stay and watch them work, take photos of the process ect?

You'd think dropping £500 on a new steering box would mean you wouldnt need to worry about it, but no 1 year later and just over 2000 miles it's leaking out the top plate. Orderd a seal kit, as I do not have the time to send it back and have the land rover out of action over the winter while I...

My 300tdi feels abit flat compared to the one i had in my disco, so i thought id check the fuel pump pin to see if its been messed with. Absoulotly stuck solid, no movement up and down, presumably water has got in while the engine was out on the floor before i bought it. Ive managed to get the...