Search results

Youngman Boss scaffold tower 3m to top platform 1 spare section and 4 poles all good just got no need for it now £275

Having a tidy up and not used this in years so time to move it on, there is no rating plate i can find, it lifted out my 19J with ease and i`ve used it to lift the front of my 90 up a meter high to get stands under so plenty of capacity. It does not fold up and is very heavy and seems to have a...

I am finally going to repaint my 90 pickup after I sort a few minor bits and pieces but don`t know which way to go with the chequer plate. Its on the bonnet, bottom of the doors and bottom of the quarters, as its all riveted on I cant simply remove it so at first was thinking go black, the rest...

Finally got round to making some rubber floor mats for the footwells and pickup bed today, quite happy with them.

Been looking at mig welders in general and come across this one https://vevor.co.uk/products/200a-mig-mag-wig-tig-mma-inverter-welder-3-in-1-mig-gas-welding-machine?gclid=Cj0KCQjwnoqLBhD4ARIsAL5JedJOHmX5FaxRWLR9jYjMsi3RORkSuhXjdqGNiqjo7s2q-rPxuLjeOJgaAr8qEALw_wcB I've found a few reviews which...

I’m trying to identify/match the paint on my sons car and found on an Aussie forum the closest match to the original colour could be Ardennes green as the car’s original colour is not available anymore and the car was repainted in this country. My question is what is a Micatallic does it refer...

I’m looking to repaint my 90 pickup and was thinking of going back to its original colour but the Id doesn’t have the paint code stamped on it. Nearest I can see is Aries windjammer blue

I noticed a slight leak from the rear half shaft so thought I’d check the axle breather which was blocked solid so cleaned it out. This doesn’t seem to have cured it so looks like it needs new seals/ gaskets? The rear axle is from I believe a Disco 1, any ideas on which seals and gaskets...

I`m thinking about swapping my 19j for a 200tdi and was thinking about the intercooler and if its absolutely necessary. My 90 is only used locally and the 19j dont have one, will it make a massive difference whats the general consensus

Been noticing that the gear lever is feeling a bit slack lately so stripped down the lever and checked the turret etc and noticed a little bit of wear on each component adding up to the slack/worn feel. Started checking out prices for all the parts when i come across the Syncro Gearbox site and...

Found myself with plenty of time on my hands so after various chassis repairs I’m starting on the body, removed the corner piece, de-rusted it and the ally painted and refitted. Question is should I keep the caps and corners body colour or go for black or white or whatever. Suggestions welcome

Another job I've been putting off for a couple of years or so is to replace the outrigger,I'm thinking of a cheapo £170 pilot arc plasma cutter, watched lots of reviews and on the whole seem to work ok for my limited use. Reason is all the info I can find on outrigger replacement says doing it...

Since I’ve had my 90 speed 2 on the front wipers has worked at the same speed as speed 1? Never really bothered me. Recently they stopped parking and speed 2 don’t work at all now so thought I’d have a look, whipped off the cover removed the park switch sprayed with WD worked it a bit , put it...

Ok finally bit the bullet after 2 years threatening it removed the door and attacked it. bit more rot than expected as door bottom looked good until I peeled the skin off

Considering converting my 90 pickup to convertible,just the cab not a full soft top and wondered if it's worthwhile fitting series doors with removable tops as my doors need some work anyway. Is there a complete kit for the roof as I'm only seeing all separate items, I think I need the hoops...

I think I`m going mad, I want to do the tappets on my 19j and also have a slight oil seep from the 3 x rubber seals on the rocker cover bolts so thought I`d order the seals and gasket. For the life of me I cant find the seals only the gasket, someone put me out of my misery please!!!

The passenger door on my 90 needs either replacing or major repair, the bottom of the frame seems fine but the top cross bar below the window is rotted and the skin is shot. I keep looking for good used but they all look worse than mine for silly money. The other option is strip off the skin...

I'm looking to fit some kind of headlining in my 90 truck cab as it's never had one in my ownership so thought while im at it why not make a roof console. I was thinking along the lines of a full width shallow console for light switches etc with a central section comming out a bit just big...

I've never had a headlining fitted since I bought it and think it's about time I done something. What's the best diy way to do it as a genuine one is too dear, I've been thinking along the lines of glueing some nice mouldable type carpet but wonder if it may just end up being a soggy sponge due...