Search results

Hi All, just passing on some info that may save time, expense & nerve’s. Had a problem a few years ago with Horn & indicators not working at all on a 1980 Series 3 FFR, Main beam on headlights ok, thought it was horn indicator stalk so replaced. Not the problem, problem found to to be aux relay...

Does anyone have any pics of the correct set up for Front Brake cylinders on a series3 109. looked at several previous posts on here and still cannot determin if mine are correct as on going front braking probs and bleeding problems. suspect 1 may have upper and lower cylinders wrong way round.

Cleaning up & repainting the transmission tunnel on my 109 and can’t read label attached to it as painted over previously, my question is what it says and any idea if I can get a replacement label?

Hi can anyone tell me the thread size for the 2 screws that hold the cover together around the steering column? Can’t find one of them after extensive search of cab and work area, just vanished!

Hi I have series 3 109 with tailgate & rusted strip on rear of tub. Can anyone advise me if there should be seal on this, and is replacement metal strip available. Can find replacements for defender but not series as seem to welded in place. Any info will be appreciated.

Hi I need to get around rear of chassis to clean it up & paint,how hard is it to remove the rear tub completely. And how is it attached. Also any idea how heavy when removing it, any advice would be appreciated!

Hi, my ex MOD 109 has failed mot on corroded rear out rigger. Looking around on line I believe the mod version is different from standard 109 outriggers (1 Tonne?), can anyone tell me, the difference and where I can get replacements, any help will be appreciated.

Hi, just started having trouble getting my series 3 into gear especially when cold, could it be the clutch not fully disengaging, or a gearbox problem?. Are there any adjustments to clutch?. Your thoughts would be appreciated.(Should mention it seems to be ok when moving)

Hi Guy's and Gals, does any one know what the correct thread is for the front valance panel screws on a series 3 should be, don't think they are self tappers as seen on ebay!

Hi All, replacing my exhaust manifold and read threads on painting finishing, but no mention if aluminium inlet manifold should /could be painted and if so what paint to use or just keep bare aluminium ...any thoughts or advise would be appreciated

Help Please...after completing a few repairs I.ve come to refit the wings near side fine held onto the front panel with a couple of strips/plates with 3 and 2 studs attached to bolt wing on. Is the offside held on the same or separate bolts and bonnet stay bracket stepped away from wing?.or have...

Hi, I have an ex mod series 3 109 with 2 spare wheels kicking around in the back, the bonnet has a spare tyre staple and rod on it and the retaining strap but I reckon that there should be something to hold the wheel onto the staple & rod on the bonnet, can anyone advise me what bits are missing...

Please Help!!!!I have just got an 1980 ex mod series 3 LWB 24v FFR which doesn't have battery clamps or covers, Does anyone know what should be there, and where I can get hold of them? cant find anything on the web for this. Also cover above nearside fuel tank missing so nothing for seat to sit in.

Just to say Hi and to say this site has already helped me with a few Basic questions I had, as new, inexperienced owner of an ex mod 24v 1980 Series 3.