Search results

Morning, Finally got some free time over the next few months, Got a 3 door project that I replaced the engine back last summer (rebuild the lump before bolting it back in) This seems the opportune time to do the inner wings and boot floor (currently full of cylinder head bits and lots of...

Gotta me a N reg 300tdi 3 door for £250, Bargain bar it was laid up 10 years or so ago, head blew big style and in a barn/cattleshed it rested till I was offered for scrap, Bugger all welding to sort, just the slight matter of recommissioning the motor !! Quite pleased, always wanted a 3dr !

Hello, I no longer has any power brakes in my K reg classic, Took the seat out to change the seat motor and now have a warning on the dash and have no assistance, Ideas ?

Hello all, With a heavy heart its time to look at getting rid of my Range Rover as I'm in need of space on my drive, Good Points, Complete service carried out All belts changed All spark plugs changed, Silicone HT leads, New coil, Recon Plenum (the big shiny thing) Minimal body rust, Chassis...

Hello, Looking to decat my 3.9 (early K Reg) Other than the pipes (that need a pair of nuts for the lambda sensors adding) and a resistor, do I need anything else ? Keeping reading that a non cat Fuel module/ECU is needed. Since they are as rare as rocking horse raisins, what do i need to do...

hello, my heap o' ****e has decided to give me more greif, Starter ( i think ) has packed up, no clicking, all lights up, just no cranking/usual sounds of a failing motor, So, what type do i need ie boshe or lucas type ? From a quick look under the thing i cant tell, so what am i looking...

Hello and good evening, So, got a 3.9 that was on LPG at some point in its life, Since owning it (and driven a total of 250 miles) since last year its lacked any grunt and "performance" I can live with the 10mpg, however lack of go is an issue, Put a LR tech to it to find its running rich...

So went to fit my bull bars which I bought and then refurbed, Have I missed something or does that not not look like it's for a RRC ? Guessing it may fit a Discovery 1 ? Was tempted to weld it on, however I thought I'd better ask if there was ever a kit to fit the thing ?

Hello chaps, Got my self a replacement B&W box as mine cant hold its drink (casing is cracked and not repairable by myself) Anything i need to do when replacing the lump (and i do mean lump) other than put fresh oil in ? Looking at the gurt old thing it looks like its going to be a sod !

hello, This thread may need moving later, So, my RRC 3.9 02/1993 needs a new viscous unit due to the previous owner covering a hairline crack with Liquid metal, cant even see where the crack is and the metal is everywhere, Found an autobox and viscous unit out of a RRC 3.5 08/1989, will it be...

Had them a while, just never fitted them, Was going to fit them to my old disco, but i sold that for scrap 3 years ago, Now got a RRC and i dont think i'd like them on the old freelander 1, As above, anyone rate them ?

Hello ! Needs a new transfer box for my money pit, Closer to Gloucester the better Doesnt need to have the viscous unit attached, but if i could get one as complete as possible.....

got a sankey that needs some loving, Left it at work last year, its been abused ie someones smashed the lights, £300 gets it gone but open to offers

hello chaps, rebuilding/trying to make good my k reg RRC, Where do these pipe (21/22) go to ?

so my RRC was broken into over the weekend (saturday after 6pm to 7am today) tools stolen but not the impact gun (worth £800) Informed the fuzz and told insurance, But the steering coloum is a mess, really disheartend at this, Since owning it in August i've only done 45 miles in it, most of...

hello, So, had a a prevailent fault since i've gotten hold of a 93 3.9 auto, Doesnt matter if cars cold or warm (although more prone to doing it warm) when at a set of lights, left in D, waiting for lights to change, as you would in any auto, hold the car on the brakes, Revs drop and...

Hello chaps, First off, vehicles a 93 3.9 (not soft dash/300tdi interior sadly) Went to take the project to work today, got in, eventually started after 1 month sat under a tree, first off noticed the front demist on works....on the passenger side, but more iritatingly the car does not...

hello, so long story short, went to change my HT leads and cap plus rotor arm, Dont all that, however, being a thick twad i didnt make a note of where to start the firing order from (yes i know the firing order) on the cap, A picture would be a great help, otherwise i'm sunk all weekend :/

hello chaps, boughta 3.9 over the weekend, it cant seem to find its base idle, its been on LPG before, its now go new heads on it, Ideas on what to look first ?

Hello, mainly after center console parts at this time, Drivers seat motor, Disco manual seats would be considered ! pictures to follow soon !