Search results

Bender Sold!

Back up for sale. Held this for a month on a promise, but guess someone's word doesn't hold like it used to!

What's it for? I have a Green top which completely failed testing, solenoid out of spec, plunger failed so totally uneconomical to repair. I wouldn't go running it, but you're welcome to it. I was going to strip it down to be nosey, but it's sat in the window shelf since getting it back!

For Sale Anglia / Hilmor Hydraulic Rotory Pipe Bender Up for sale is my rather beastly Pipe bender. It’s an Anglia Power Bend (also known as a Hilmor Rotory Hydraulic No.3). It’s an absolutely fabulous piece of English heavy-duty machinery! I bought this a couple of years ago looking...

Have you had the fuel line off the FPR with the ignition pumping to see if you have fuel coming out the feed pipe?

Did you change the FPR? Have you had it running since the new filter head went on? What positions did you put the hoses back onto the head? I can't remember what point yours stopped firing?

Hi Brown, I can't remember exactly the symptoms, but wasn't one of your issues, you thought you were getting diesel in oil? Have you put a fresh pot of oil in after the injector seal change, just so you can monitor it? What issues have you now got? Not starting? Is this since the injector seal...

I'd be up for this. My local knowledge is limited though, but can try to piece something together!

WJN000030 as ordered from Brookwell. Same as the other 2 part numbers, just a different water sensor basically.

Use the D2 TD5 Filter housing. I posted part numbers on here somewhere! It's exactly identical, but £100 cheaper (or there or there abouts!). Mine was corroded around the edges to. The D2 one has all the correct filters and one-way valves. They come loose just so you can check they are in...

Just to confirm the Locker is in the 90, assumabley running the normal 'Long Nose'? And pics on the bumpers (and locker to)?

Still interested in a good chunk of it if you have those pics at all :)

Interested in ARB and Snatch ... Have you any pics of bumper? And what code is the ARB? Just wondering if it'll fit a short nose rear diff? What condition are the Recips in? Just curious as always fancied trying them! Stick a pick of bumper up to!

Tubular bumper back up for sale. Buyer never came through!

Hi All, The IAP in the TD5 air box (which I believe is to pick-up the altitude changes based on pressure). Is this ok to relocate within the inlet tract or is this based on the pressure within the set air box size/measurement? So if the air box should change in shape and/or size, the...

It has to have V5/I.D to be able to legally sell it I believe so it should have it I would imagine! Only way it can be sold without is if it's an unmarked/non stamped chassis (like a Marshal/Richards Galvy one).

YRM sell those in SS or Ally I believe? And the usual eBlag! P.s. Ace Eddie avatar!

Up we go. Some prices adjusted and few more bits added!

Leebastard, JohnM70 has put his name on the bumper and currently just deciding on springs! I'll keep you posted if he changes his mind etc!

One more of Bumper.