That bracket would be an easy make
When I did mine, paddocks was doing a good deal on galvanized turrets, rings and shocks.
Was you having a lack of power prior to lift pump change? I wasn't. I was getting full power, good acceleration and nice tick over.
A while ago I asked @jamesmartin if he could determine the cause of a ticking noise similar to when as kids, youd put a lollystick in the spokes...
I'm having trouble getting perrier
Torqued up sump, flushed out block, put it all back together and filled with oil. Just got the cooling system to refill and that will be it,...
Any advantage using rainwater as opposed to tap water in my rad? Cant be arsed getting distilled water.
Cleaned and put sump back on. Changed lift pump. Put all pulleys back on and torqued up. Flushed out rad. Cant believe the rusty water that came...
@jamesmartin , I put the crank pulley back on no problem but then it dawned on me, how far on should I put it? Tapped it all the way home but will...
Someone please give me the answer I want to hear. Gasket snapped taking the cover of. I want to just clean it and put it back with a dab of rtv...
Thanks dag, after snapping my extension bar in half with a 6ft scaffold tube, I bit the bullet and tied my breaker bar under under the chassis...
I've seen a homemade one like that on a you tube vid about changing cambelt on a disco. Would it be better out of gear with foot on brakes?
All I've got in shed at the moment.
In gear on the floor, mrs on the brake pedal.
Crankshaft bolt, nuff said. :(.
Never did like small windows in the side panels. Full length look good in a 90.
All wd,d up and ready with scaffold tube tomorrow.
Separate names with a comma.