Followed your instructions and it works!
Thank you thousand times to all for your support!!
I hope you are correct and I will try tonight.
Have you done it?
Will it actually work?
I have a key blade without remote. This fits the locking cylinder and steering column.
What’s “locking sand”?
I thought that it was impossibly...
I have Nanocom.
How to program EMS code? Is it a number that must be equal in the becm?
Hopefully the dealer can get me a new key.
I did read a...
2001 P38 2.5 DSE. I drop the key in the sea. And the only spare key I have is a key without remote. That key have never worked. So tomorow I will...
Modulation was 5-30% on idle with warm engine
The register chain was on it way thru the chain guide tensioner.
Change complete register.
The engine sounds fantastic.
Idle is rock...
Stc 3679 fits up to VIN YA447505. After that the kondenser is shorter.
Any suggestions on how and where to get a new condenser that fits the late P38 diesel models?
I know there is a original one cost enormous...
When the pin is inside flywheel I have play for about 0,04mm. Is that correct? Maybe I have hit the other flywheel hole?
Today I followed a tip for checking the woodruff key in the FIP was in placed. Turn the cam love against inlet. Insert locking tool in flywheel,...
I followed the RAVE manual injection time check.
Set no 1 cam lobe upwards. Mount the gauge in pump with 2mm press.
Zero gauge at...
I have checked and dobbel checked the static timing.
I was 100% sure that timing was faulty before doing this.
I consider to check the register...
With nanocom I have readings from the needle sensor and crank sensor signal.
How do I check the readings is correct?
The FIP is leaking, will...
I have a 2001 Range Rover diesel with that have a engine problem.
The engine runs very hard. It sounds like misfiring or knocking. Nanocom have...
Separate names with a comma.