How about wheel bearings? Are they tight.
I had a noise from mine for months after I lifted it & couldn't find it. It was a rumble like something...
I made a bracket to fit to the back of the bulkhead
Cheers guys all bolted in.
Just need a left hand nut for the sumo bar to turn up to finnish it off
Cheers, I'll have a look when i take it off. If not i just swop the whole box
Great news thanks, i know the arms different & I've got all the bits to convert that.
I've got a leak & the drop arm bush has worn so much i cant press the top cup out of the arm, on my 6 bolt steering box.
I've got a 4 bolt disco...
Impreza seats fit very easy, just as easy as RX8.
Hi Coffeelandy. I fitted Scooby seats in mine a few years ago & have been happy with them only problem is they are a bit high but I've seen you...
Run a wire from the lights to earth to double check
Stolen last night from Sawbridgeworth. Please contact the police
I ended up paying to have mine fitted, think it come to £250 in the end.
It's the best mod ever. Won't be without mine now.
Like you said, wires,...
£100 HOW MUCH
You just need a relay, a switch, a fuse & some wire.
Fitted one in mine which is from 1990, very easy.
Strips of rubber down the side of the window to fill the gap
No second hand but with very little wear
I've just 3 pairs of 10 spline rear shafts.
£15 a pair & carriage or pick up from Harlow Essex
Fitted mine with the centre seat still in place. Just fit them a little higher, about 25mm
Is there a lot of difference in the internals on a Auto to Manual injector pump?
The engine was from one of the first Auto Disco's, so must be...
I had a set of Scooby seats with the middle seat still in. They do hang over the middle one a bit but it will help keep the young one in place,...
For what it costs put a new rad & heater matrix in.
Mine used to do the same & only on a motorway as well.
Separate names with a comma.