I have a discovery 1 on my drive.
Passenger side floor is missing (I was going to learn how to weld it back) and i think the starter...
The switches i bought are 12v 20 amps.
from here 12 V LED Switch
1 switch for tyre air compressor
1 " " roof lights x 4
1 " " cabin led light
2 " " volt...
Im looking to run some electrical extras on me disco1 powered through a fusebox attatched to my secondary battery.
I have had a dash...
I think my gym days are sadly over.... Lol
How many amps would be required to run a winch wih a split charge system?
I'm off to billing this weekend and hope to get a split charge system for me disco1.
I have one red and one yellow optima battery's at...
Isn't there a slit along the thread that can be opened slightly by using a hammer and old screwdriver?
Im looking for a set of steel wheels for me discovery 1, Essex area.
Thanks to all for feedback.
My disco1 has the later model headlights fitted but not properly so i may purchase the later model headlight pannel...
Chris is right try YRM solutions they have a good selection of parts and pannels though they look a bit expensive to me.
I have the jobs...
Google images, amazing what i found....lol
Im told that the under wheel arch just beneath the headlight housing is not a M.O.T fail if its...
I hope this makes sense.
Im now looking for pictures of where the bottom of the inner wing/wheel arch meet the front of the disco1....
So thats where my cat gets to...lol
Have you changed your body mounts recently?
If so were did you purchase them and how much did they cost?
Is it possible to purchase all body...
I do have a engine hoist to lift one end at a time, just hoping the actual body mounts arn't too rusty.
The brakes seem ok after a few drives but will get them redone after the body mount bushes and inner wings are all replaced.
Thanks for the funny...
I put another nut on the thread and added some thread lock to it, it seems to of held.
But before the car goes green laining or off road i will...
I came home from work on day six and he had completed the job. Or so he told me on the phone.
Test drove the disco and brakes were very spongy...
Separate names with a comma.