Asian place by me is doing 2 1 liter bottles for £1, im going to go clear them out tomorrow :D
50/50 is the max I'll go I think
Ran it on vegetable oil for the first time today (because it's currently almost half the price of diesel) and it hasn't exploded yet.
Mine has a latch through the grill
AMR3321 is what I have fitted to my disco 300tdi in to early 110 and it's sits bang on half way (and then slightly over when I forgot to open the...
Before spending a penny on bolt on bits,
Make sure you check the entire thing properly for rust ... And then getting it in good mechanical shape.
Still think the valve clearances need checking,
Seems like something that gets neglected quite a lot
This is the one
Not the same engine, but my 300tdi did this when the tappets needed adjusting.
How do you know the cylinder head is cracked
Gave it a service :)
Just pulled the tensioner back, there is a lot more slack in the belt then there first was but still no noise :D
The outer diameter of the pulley Inc the lip is 52mm, so presumably the 49mm pulley not the earlier 61mm,
I have a 1580 belt on so it's correct?
I've always bought dayco belts and they've always squeeled quite bad, especially on full lock and they seem to fit quite loose.
Tried a gates...
With a 1.66 transfer box mine is revving it's nuts off at 60, relativly quick off the line though.
Weird, I never got one when I removed the rear seats out my disco
Mine hasn't had a single advisory in all its MOTs :D
It's only had 3 but that's besides the point ..
Heres my satin NATO green when first painted in '17
Not sure if you can tell in the photos but it's faded nicely
Separate names with a comma.